Base
EU TARICChapter 76

Chapter 76: Aluminum and Articles Thereof

332 CN codes · 0 declarable · Updated monthly from DG TAXUD

CN Codes

Full detail on EU TARIC →
CN CodeDescriptionDeclarableTrade Measures
76 00ALUMINIUM AND ARTICLES THEREOF :——
76 01Unwrought aluminium :——
76 01 10Aluminium, not alloyed :——
76 01 10 10Slabs——
76 01 10 90Other——
76 01 20Aluminium alloys :——
76 01 20 30Slabs——
76 01 20 40Billets——
76 01 20 80Other——
76 02Aluminium waste and scrap :——
76 02 00 11Waste :——
76 02 00 11Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0,2 mm——
76 02 00 19Other (including factory rejects)——
76 02 00 90Scrap——
76 03Aluminium powders and flakes :——
76 03 10Powders of non-lamellar structure——
76 03 20Powders of lamellar structure; flakes——
76 04Aluminium bars, rods and profiles :——
76 04 10Of aluminium, not alloyed :——
76 04 10 10Bars and rods :——
76 04 10 10 11Unassembled, containing not more than 99.3% of aluminium——
76 04 10 10 90Other——
76 04 10 90Profiles :——
76 04 10 90 11Bearing a specific manufacture number, for use in certain types of aircraft :——
76 04 10 90 11Unassembled, containing not more than 99.3% of aluminium——
76 04 10 90 19Other——
76 04 10 90 25Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft :——
76 04 10 90 25Unassembled, containing not more than 99.3% of aluminium——
76 04 10 90 29Other——
76 04 10 90 80Other :——
76 04 10 90 80Unassembled, containing not more than 99.3% of aluminium——
76 04 10 90 89Other——
76 04 21Of aluminium alloys :——
76 04 21Hollow profiles——
76 04 29Other :——
76 04 29 10Bars and rods——
76 04 29 90Profiles :——
76 04 29 90 10Bearing a specific manufacture number, for use in certain types of aircraft——
76 04 29 90 20Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft——
76 04 29 90 90Other——
76 05Aluminium wire :——
76 05 11Of aluminium, not alloyed :——
76 05 11Of which the maximum cross-sectional dimension exceeds 7 mm——
76 05 19Other :——
76 05 19 00 10Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm——
76 05 19 00 90Other——
76 05 21Of aluminium alloys :——
76 05 21Of which the maximum cross-sectional dimension exceeds 7 mm :——
76 05 21 00 10Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in coils, for use in the manufacture of aeronautical fasteners——
76 05 21 00 90Other——
76 05 29Other——
76 06Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm :——
76 06 11Rectangular (including square) :——
76 06 11Of aluminium, not alloyed :——
76 06 11 30Aluminium Composite Panel——
76 06 11 50Other :——
76 06 11 50Painted, varnished or coated with plastics :——
76 06 11 50 25Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 11 50 25Not backed, without internal layers of other material——
76 06 11 50 30Other——
76 06 11 50 86Other :——
76 06 11 50 86Not backed, without internal layers of other material——
76 06 11 50 89Other——
76 06 11 91Other, of a thickness of :——
76 06 11 91Less than 3 mm :——
76 06 11 91 25Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 11 91 25Not backed, without internal layers of other material——
76 06 11 91 30Other——
76 06 11 91 86Other :——
76 06 11 91 86Not backed, without internal layers of other material——
76 06 11 91 89Other——
76 06 11 93Not less than 3 mm but less than 6 mm :——
76 06 11 93 25Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 11 93 25Not backed, without internal layers of other material——
76 06 11 93 30Other——
76 06 11 93 86Other :——
76 06 11 93 86Not backed, without internal layers of other material——
76 06 11 93 89Other——
76 06 11 99Not less than 6 mm :——
76 06 11 99 25Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 11 99 25Not backed, without internal layers of other material——
76 06 11 99 30Other——
76 06 11 99 86Other :——
76 06 11 99 86Not backed, without internal layers of other material——
76 06 11 99 89Other——
76 06 12Of aluminium alloys :——
76 06 12 11Beverage can body stock, end stock and tab stock :——
76 06 12 11Beverage can body stock——
76 06 12 19Beverage can end stock and tab stock——
76 06 12 30Aluminium Composite Panel——
76 06 12 50Other :——
76 06 12 50Painted, varnished or coated with plastics :——
76 06 12 50 23Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 12 50 23Not backed, without internal layers of other material :——
76 06 12 50 23Of a thickness of not less than 0,8 mm——
76 06 12 50 25Other——
76 06 12 50 30Other——
76 06 12 50 85Other :——
76 06 12 50 85Not backed, without internal layers of other material :——
76 06 12 50 85For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm——
76 06 12 50 87Other :——
76 06 12 50 87Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels——
76 06 12 50 88Other——
76 06 12 50 89Other——
76 06 12 92Other, of a thickness of :——
76 06 12 92Less than 3 mm :——
76 06 12 92 23Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 12 92 23Not backed, without internal layers of other material :——
76 06 12 92 23Of a thickness of not less than 0,8 mm——
76 06 12 92 25In coils or in coiled strips in cut-to-length sheets, or in the form of circles——
76 06 12 92 27Other——
76 06 12 92 30Other——
76 06 12 92 91Other :——
76 06 12 92 91Not backed, without internal layers of other material :——
76 06 12 92 91For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm——
76 06 12 92 92Other :——
76 06 12 92 92Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels——
76 06 12 92 93In coils or in coiled strips in cut-to-length sheets, or in the form of circles; of a thickness of 0,2 mm or more——
76 06 12 92 94Other——
76 06 12 92 97Other——
76 06 12 93Not less than 3 mm but less than 6 mm :——
76 06 12 93 10Plates bearing a specific manufacture number, for use in certain types of aircraft——
76 06 12 93 85Other :——
76 06 12 93 85Not backed, without internal layers of other material :——
76 06 12 93 85For use as body panels in the car industry or for use in the manufacture of aircraft parts——
76 06 12 93 86In coils or in coiled strips, in cut-to-length sheets, or in the form of circles——
76 06 12 93 87Other——
76 06 12 93 88Other——
76 06 12 99Not less than 6 mm :——
76 06 12 99 10Plates bearing a specific manufacture number, for use in certain types of aircraft——
76 06 12 99 21Sheets of aluminium-lithium alloys :——
76 06 12 99 21Not backed, without internal layers of other material :——
76 06 12 99 21For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts——
76 06 12 99 25In plates, of a thickness of more than 6 mm——
76 06 12 99 29Other——
76 06 12 99 30Other——
76 06 12 99 85Other :——
76 06 12 99 85Not backed, without internal layers of other material :——
76 06 12 99 85For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts——
76 06 12 99 86In plates, of a thickness of more than 6 mm——
76 06 12 99 87Other——
76 06 12 99 88Other——
76 06 91Other :——
76 06 91Of aluminium, not alloyed :——
76 06 91 00 25Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 91 00 25Not backed, without internal layers of other material,<br>- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;<br>- in plates, of a thickness exceeding 6 mm<br>——
76 06 91 00 30Other——
76 06 91 00 86Other :——
76 06 91 00 86Not backed, without internal layers of other material,<br>- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;<br>- in plates, of a thickness exceeding 6 mm<br>——
76 06 91 00 88Other——
76 06 92Of aluminium alloys :——
76 06 92 00 23Plates bearing a specific manufacture number, for use in certain types of aircraft :——
76 06 92 00 23Not backed, without internal layers of other material,<br>- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;<br>- in plates, of a thickness exceeding 6 mm<br> :——
76 06 92 00 23Of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts——
76 06 92 00 25Other——
76 06 92 00 30Other——
76 06 92 00 85Other :——
76 06 92 00 85Not backed, without internal layers of other material,<br>- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;<br>- in plates, of a thickness exceeding 6 mm<br> :——
76 06 92 00 85For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm——
76 06 92 00 91Other :——
76 06 92 00 91Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels——
76 06 92 00 92Other——
76 06 92 00 95Other——
76 07Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm :——
76 07 11Not backed :——
76 07 11Rolled but not further worked :——
76 07 11 11Of a thickness of less than 0,021 mm :——
76 07 11 11In rolls of a weight not exceeding 10 kg :——
76 07 11 11 11Of a thickness of 0,007 mm or more but less than 0,021 mm :——
76 07 11 11 11Consigned from Thailand——
76 07 11 11 19Other——
76 07 11 11 90Other——
76 07 11 19Other :——
76 07 11 19 10For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm——
76 07 11 19 30For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed——
76 07 11 19 40For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed——
76 07 11 19 50For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed——
76 07 11 19 60For other uses than household aluminium foil,<br>- Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or,<br>- Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or,<br>- Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed——
76 07 11 19 91Other :——
76 07 11 19 91Aluminium converter foil——
76 07 11 19 94Household aluminium foil——
76 07 11 19 96Other——
76 07 11 90Of a thickness of not less than 0,021 mm but not more than 0,2 mm :——
76 07 11 90 44Aluminium foil in rolls:<br>- having a purity of 99,99 % by weight, <br>- of a thickness of 0,021 mm or more but not more than 0,2 mm, <br>- with a width of 500 mm, <br>- with a surface oxide layer by 3 to 4 nm thick, <br>- and with a cubic texture of more than 95 % :——
76 07 11 90 44Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers :——
76 07 11 90 44Of a thickness of not less than 0,03 mm, without internal layers of other material——
76 07 11 90 46Other——
76 07 11 90 48Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil :——
76 07 11 90 48Of a thickness of not less than 0,03 mm, without internal layers of other material——
76 07 11 90 49Other——
76 07 11 90 51Other :——
76 07 11 90 51Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips——
76 07 11 90 52Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles :——
76 07 11 90 52Without internal layers of other material :——
76 07 11 90 52Alloyed, for use as body panels in the car industry——
76 07 11 90 53Other——
76 07 11 90 54Other——
76 07 11 90 56Other——
76 07 11 90 65Plain aluminium foil with the following parameters: <br>- an aluminium content of 99,98 % or more <br>- a thickness of 0,070 mm or more but not more than 0,125 mm <br>- with a cubic texture of a kind used for high voltage etching :——
76 07 11 90 65Without internal layers of other material, in coils or in coiled strips——
Showing 200 of 332 codes. View all on EU TARIC →

HS Headings in Chapter 76 (55)

76 00ALUMINIUM AND ARTICLES THEREOF :
76 01Unwrought aluminium :
76 01 10Aluminium, not alloyed :
76 01 20Aluminium alloys :
76 02Aluminium waste and scrap :
76 03Aluminium powders and flakes :
76 03 10Powders of non-lamellar structure
76 03 20Powders of lamellar structure; flakes
76 04Aluminium bars, rods and profiles :
76 04 10Of aluminium, not alloyed :
76 04 21Of aluminium alloys :
76 04 21Hollow profiles
76 04 29Other :
76 05Aluminium wire :
76 05 11Of aluminium, not alloyed :
76 05 11Of which the maximum cross-sectional dimension exceeds 7 mm
76 05 19Other :
76 05 21Of aluminium alloys :
76 05 21Of which the maximum cross-sectional dimension exceeds 7 mm :
76 05 29Other
76 06Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm :
76 06 11Rectangular (including square) :
76 06 11Of aluminium, not alloyed :
76 06 12Of aluminium alloys :
76 06 91Other :
76 06 91Of aluminium, not alloyed :
76 06 92Of aluminium alloys :
76 07Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm :
76 07 11Not backed :
76 07 11Rolled but not further worked :
76 07 19Other :
76 07 20Backed :
76 08Aluminium tubes and pipes :
76 08 10Of aluminium, not alloyed :
76 08 20Of aluminium alloys :
76 09Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) :
76 10Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures :
76 10 10Doors, windows and their frames and thresholds for doors
76 10 90Other :
76 11Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
76 12Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment :
76 12 10Collapsible tubular containers
76 12 90Other :
76 13Aluminium containers for compressed or liquefied gas :
76 14Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated :
76 14 10With steel core
76 14 90Other
76 15Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium :
76 15 10Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like :
76 15 20Sanitary ware and parts thereof
76 16Other articles of aluminium :
76 16 10Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles :
76 16 91Other :
76 16 91Cloth, grill, netting and fencing, of aluminium wire
76 16 99Other :

Other EU TARIC Chapters

Ch. 01Ch. 02Ch. 03Ch. 04Ch. 05Ch. 06Ch. 07Ch. 08Ch. 09Ch. 10Ch. 11Ch. 12Ch. 13Ch. 14Ch. 15Ch. 16Ch. 17Ch. 18Ch. 19Ch. 20View all →

Track Chapter 76 EU trade measures

Get alerted when duty rates change or new anti-dumping measures apply to Aluminum and Articles Thereof goods in the EU.

Join the Waitlist →