Base
EU TARICChapter 72

Chapter 72: Iron and Steel

1001 CN codes · 0 declarable · Updated monthly from DG TAXUD

CN Codes

Full detail on EU TARIC →
CN CodeDescriptionDeclarableTrade Measures
72 00IRON AND STEEL :——
72 01I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM :——
72 01Pig iron and spiegeleisen in pigs, blocks or other primary forms :——
72 01 10Non-alloy pig iron containing by weight 0,5 % or less of phosphorus :——
72 01 10 11Containing by weight not less than 0,4 % of manganese :——
72 01 10 11Containing by weight 1 % or less of silicon :——
72 01 10 11 10Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm——
72 01 10 11 90Other——
72 01 10 19Containing by weight more than 1 % of silicon——
72 01 10 30Containing by weight not less than 0,1 % but less than 0,4 % of manganese :——
72 01 10 30 10Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon——
72 01 10 30 90Other——
72 01 10 90Containing by weight less than 0,1 % of manganese——
72 01 20Non-alloy pig iron containing by weight more than 0,5 % of phosphorus——
72 01 50Alloy pig iron; spiegeleisen :——
72 01 50 10Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium——
72 01 50 90Other——
72 02Ferro-alloys :——
72 02 11Ferro-manganese :——
72 02 11Containing by weight more than 2 % of carbon :——
72 02 11 20With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %——
72 02 11 80Other——
72 02 19Other——
72 02 21Ferro-silicon :——
72 02 21Containing by weight more than 55 % of silicon——
72 02 29Other :——
72 02 29 10Containing by weight 4 % or more but not more than 10 % of magnesium——
72 02 29 90Other——
72 02 30Ferro-silico-manganese——
72 02 41Ferro-chromium :——
72 02 41Containing by weight more than 4 % of carbon :——
72 02 41 10Containing by weight more than 4 % but not more than 6 % of carbon——
72 02 41 90Containing by weight more than 6 % of carbon——
72 02 49Other :——
72 02 49 10Containing by weight not more than 0,05 % of carbon :——
72 02 49 10 20Containing by weight more than 30 % but not more than 90 % of chromium (super-refined ferrochromium)——
72 02 49 10 90Other——
72 02 49 50Containing by weight more than 0,05 % but not more than 0,5 % of carbon :——
72 02 49 50 11With a chromium content by weight of 30% and more :——
72 02 49 50 11Containing by weight not more than 0,1 % of carbon and more than 30 % but not more than 90 % of chromium (super-refined ferrochromium)——
72 02 49 50 19Other——
72 02 49 50 90Other——
72 02 49 90Containing by weight more than 0,5 % but not more than 4 % of carbon——
72 02 50Ferro-silico-chromium——
72 02 60Ferro-nickel——
72 02 70Ferro-molybdenum——
72 02 80Ferro-tungsten and ferro-silico-tungsten——
72 02 91Other :——
72 02 91Ferro-titanium and ferro-silico-titanium——
72 02 92Ferro-vanadium——
72 02 93Ferro-niobium——
72 02 99Other :——
72 02 99 10Ferro-phosphorus——
72 02 99 30Ferro-silico-magnesium——
72 02 99 80Other :——
72 02 99 80 30Calcium-silicon - an alloy that contains by weight 16 % or more of calcium, 45 % or more of silicon, not less than 4 % but less than 14 % of iron and not more than 10 % of any other element; whether or not presented in bulk, packaged in bags or in steel drums, enclosed in steel sheets (or cored wire), or otherwise presented——
72 02 99 80 90Other——
72 03Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms :——
72 03 10Ferrous products obtained by direct reduction of iron ore——
72 03 90Other——
72 04Ferrous waste and scrap; remelting scrap ingots of iron or steel :——
72 04 10Waste and scrap of cast iron——
72 04 21Waste and scrap of alloy steel :——
72 04 21Of stainless steel :——
72 04 21 10Containing by weight 8 % or more of nickel :——
72 04 21 10 10Scrap——
72 04 21 10 90Other——
72 04 21 90Other :——
72 04 21 90 10Scrap——
72 04 21 90 90Other——
72 04 29Other :——
72 04 29 00 10Scrap——
72 04 29 00 90Other——
72 04 30Waste and scrap of tinned iron or steel :——
72 04 30 00 10Scrap——
72 04 30 00 90Other——
72 04 41Other waste and scrap :——
72 04 41Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles :——
72 04 41 10Turnings, shavings, chips, milling waste, sawdust and filings :——
72 04 41 10 10Scrap——
72 04 41 10 90Other——
72 04 41 91Trimmings and stampings :——
72 04 41 91In bundles :——
72 04 41 91 10Scrap——
72 04 41 91 90Other——
72 04 41 99Other :——
72 04 41 99 10Scrap——
72 04 41 99 90Other——
72 04 49Other :——
72 04 49 10Fragmentised (shredded) :——
72 04 49 10 10Scrap——
72 04 49 10 90Other——
72 04 49 30Other :——
72 04 49 30In bundles :——
72 04 49 30 10Scrap——
72 04 49 30 90Other——
72 04 49 90Other :——
72 04 49 90 10Scrap——
72 04 49 90 90Other——
72 04 50Remelting scrap ingots——
72 05Granules and powders, of pig iron, spiegeleisen, iron or steel :——
72 05 10Granules——
72 05 21Powders :——
72 05 21Of alloy steel——
72 05 29Other——
72 06II. IRON AND NON-ALLOY STEEL :——
72 06Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203) :——
72 06 10Ingots——
72 06 90Other——
72 07Semi-finished products of iron or non-alloy steel :——
72 07 11Containing by weight less than 0,25 % of carbon :——
72 07 11Of rectangular (including square) cross-section, the width measuring less than twice the thickness :——
72 07 11 11Rolled or obtained by continuous casting :——
72 07 11 11Of free-cutting steel——
72 07 11 14Other :——
72 07 11 14Of a thickness not exceeding 130 mm——
72 07 11 16Of a thickness exceeding 130 mm——
72 07 11 90Forged——
72 07 12Other, of rectangular (other than square) cross-section :——
72 07 12 10Rolled or obtained by continuous casting——
72 07 12 90Forged——
72 07 19Other :——
72 07 19 12Of circular or polygonal cross-section :——
72 07 19 12Rolled or obtained by continuous casting——
72 07 19 19Forged——
72 07 19 80Other :——
72 07 19 80 10Blanks for angles, shapes and sections, rolled or obtained by continuous casting——
72 07 19 80 90Other——
72 07 20Containing by weight 0,25 % or more of carbon :——
72 07 20 11Of rectangular (including square) cross-section, the width measuring less than twice the thickness :——
72 07 20 11Rolled or obtained by continuous casting :——
72 07 20 11Of free-cutting steel——
72 07 20 15Other, containing by weight :——
72 07 20 150,25 % or more but less than 0,6 % of carbon——
72 07 20 170,6 % or more of carbon——
72 07 20 19Forged——
72 07 20 32Other, of rectangular (other than square) cross-section :——
72 07 20 32Rolled or obtained by continuous casting——
72 07 20 39Forged——
72 07 20 52Of circular or polygonal cross-section :——
72 07 20 52Rolled or obtained by continuous casting——
72 07 20 59Forged——
72 07 20 80Other :——
72 07 20 80 10Blanks for angles, shapes and sections, rolled or obtained by continuous casting——
72 07 20 80 90Other——
72 08Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated :——
72 08 10In coils, not further worked than hot-rolled, with patterns in relief——
72 08 25Other, in coils, not further worked than hot-rolled, pickled :——
72 08 25Of a thickness of 4,75 mm or more——
72 08 26Of a thickness of 3 mm or more but less than 4,75 mm——
72 08 27Of a thickness of less than 3 mm——
72 08 36Other, in coils, not further worked than hot-rolled :——
72 08 36Of a thickness exceeding 10 mm——
72 08 37Of a thickness of 4,75 mm or more but not exceeding 10 mm :——
72 08 37 00 10Intended for re-rolling——
72 08 37 00 90Other——
72 08 38Of a thickness of 3 mm or more but less than 4,75 mm :——
72 08 38 00 10Intended for re-rolling——
72 08 38 00 90Other——
72 08 39Of a thickness of less than 3 mm :——
72 08 39 00 10Intended for re-rolling——
72 08 39 00 90Other——
72 08 40Not in coils, not further worked than hot-rolled, with patterns in relief :——
72 08 40 00 10Of a thickness of 2 mm or more——
72 08 40 00 90Of a thickness of less than 2 mm——
72 08 51Other, not in coils, not further worked than hot-rolled :——
72 08 51Of a thickness exceeding 10 mm :——
72 08 51 20Of a thickness exceeding 15 mm :——
72 08 51 20 10Of non-alloy steel, excluding tool steel<br>——
72 08 51 20 90Other——
72 08 51 91Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of :——
72 08 51 912 050 mm or more :——
72 08 51 91 10Of non-alloy steel, excluding tool steel<br>——
72 08 51 91 90Other——
72 08 51 98Less than 2 050 mm :——
72 08 51 98 10Of non-alloy steel, excluding tool steel<br>——
72 08 51 98 90Other——
72 08 52Of a thickness of 4,75 mm or more but not exceeding 10 mm :——
72 08 52 10Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm——
72 08 52 91Other, of a width of :——
72 08 52 912 050 mm or more :——
72 08 52 91 10Of non-alloy steel, excluding tool steel<br>——
72 08 52 91 90Other——
72 08 52 99Less than 2 050 mm——
72 08 53Of a thickness of 3 mm or more but less than 4,75 mm :——
72 08 53 10Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more——
72 08 53 90Other——
72 08 54Of a thickness of less than 3 mm——
72 08 90Other :——
72 08 90 20Perforated :——
72 08 90 20 10Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more——
72 08 90 20 90Other——
72 08 90 80Other :——
72 08 90 80 10Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)——
72 08 90 80 20Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more——
72 08 90 80 90Other——
72 09Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated :——
72 09 15In coils, not further worked than cold-rolled (cold-reduced) :——
72 09 15Of a thickness of 3 mm or more :——
72 09 15 00 10'Electrical'——
Showing 200 of 1001 codes. View all on EU TARIC →

HS Headings in Chapter 72 (233)

72 00IRON AND STEEL :
72 01I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM :
72 01Pig iron and spiegeleisen in pigs, blocks or other primary forms :
72 01 10Non-alloy pig iron containing by weight 0,5 % or less of phosphorus :
72 01 20Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
72 01 50Alloy pig iron; spiegeleisen :
72 02Ferro-alloys :
72 02 11Ferro-manganese :
72 02 11Containing by weight more than 2 % of carbon :
72 02 19Other
72 02 21Ferro-silicon :
72 02 21Containing by weight more than 55 % of silicon
72 02 29Other :
72 02 30Ferro-silico-manganese
72 02 41Ferro-chromium :
72 02 41Containing by weight more than 4 % of carbon :
72 02 49Other :
72 02 50Ferro-silico-chromium
72 02 60Ferro-nickel
72 02 70Ferro-molybdenum
72 02 80Ferro-tungsten and ferro-silico-tungsten
72 02 91Other :
72 02 91Ferro-titanium and ferro-silico-titanium
72 02 92Ferro-vanadium
72 02 93Ferro-niobium
72 02 99Other :
72 03Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms :
72 03 10Ferrous products obtained by direct reduction of iron ore
72 03 90Other
72 04Ferrous waste and scrap; remelting scrap ingots of iron or steel :
72 04 10Waste and scrap of cast iron
72 04 21Waste and scrap of alloy steel :
72 04 21Of stainless steel :
72 04 29Other :
72 04 30Waste and scrap of tinned iron or steel :
72 04 41Other waste and scrap :
72 04 41Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles :
72 04 49Other :
72 04 50Remelting scrap ingots
72 05Granules and powders, of pig iron, spiegeleisen, iron or steel :
72 05 10Granules
72 05 21Powders :
72 05 21Of alloy steel
72 05 29Other
72 06II. IRON AND NON-ALLOY STEEL :
72 06Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203) :
72 06 10Ingots
72 06 90Other
72 07Semi-finished products of iron or non-alloy steel :
72 07 11Containing by weight less than 0,25 % of carbon :
72 07 11Of rectangular (including square) cross-section, the width measuring less than twice the thickness :
72 07 12Other, of rectangular (other than square) cross-section :
72 07 19Other :
72 07 20Containing by weight 0,25 % or more of carbon :
72 08Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated :
72 08 10In coils, not further worked than hot-rolled, with patterns in relief
72 08 25Other, in coils, not further worked than hot-rolled, pickled :
72 08 25Of a thickness of 4,75 mm or more
72 08 26Of a thickness of 3 mm or more but less than 4,75 mm
72 08 27Of a thickness of less than 3 mm
72 08 36Other, in coils, not further worked than hot-rolled :
72 08 36Of a thickness exceeding 10 mm
72 08 37Of a thickness of 4,75 mm or more but not exceeding 10 mm :
72 08 38Of a thickness of 3 mm or more but less than 4,75 mm :
72 08 39Of a thickness of less than 3 mm :
72 08 40Not in coils, not further worked than hot-rolled, with patterns in relief :
72 08 51Other, not in coils, not further worked than hot-rolled :
72 08 51Of a thickness exceeding 10 mm :
72 08 52Of a thickness of 4,75 mm or more but not exceeding 10 mm :
72 08 53Of a thickness of 3 mm or more but less than 4,75 mm :
72 08 54Of a thickness of less than 3 mm
72 08 90Other :
72 09Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated :
72 09 15In coils, not further worked than cold-rolled (cold-reduced) :
72 09 15Of a thickness of 3 mm or more :
72 09 16Of a thickness exceeding 1 mm but less than 3 mm :
72 09 17Of a thickness of 0,5 mm or more but not exceeding 1 mm :
72 09 18Of a thickness of less than 0,5 mm :
72 09 25Not in coils, not further worked than cold-rolled (cold-reduced) :
72 09 25Of a thickness of 3 mm or more :
72 09 26Of a thickness exceeding 1 mm but less than 3 mm :
72 09 27Of a thickness of 0,5 mm or more but not exceeding 1 mm :
72 09 28Of a thickness of less than 0,5 mm :
72 09 90Other :
72 10Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated :
72 10 11Plated or coated with tin :
72 10 11Of a thickness of 0,5 mm or more :
72 10 12Of a thickness of less than 0,5 mm :
72 10 20Plated or coated with lead, including terne-plate :
72 10 30Electrolytically plated or coated with zinc :
72 10 41Otherwise plated or coated with zinc :
72 10 41Corrugated :
72 10 49Other :
72 10 50Plated or coated with chromium oxides or with chromium and chromium oxides :
72 10 61Plated or coated with aluminium :
72 10 61Plated or coated with aluminium-zinc alloys :
72 10 69Other :
72 10 70Painted, varnished or coated with plastics :
72 10 90Other :
72 11Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated :
72 11 13Not further worked than hot-rolled :
72 11 13Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief :
72 11 14Other, of a thickness of 4,75 mm or more :
72 11 19Other :
72 11 23Not further worked than cold-rolled (cold-reduced) :
72 11 23Containing by weight less than 0,25 % of carbon :
72 11 29Other :
72 11 90Other :
72 12Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated :
72 12 10Plated or coated with tin :
72 12 20Electrolytically plated or coated with zinc :
72 12 30Otherwise plated or coated with zinc :
72 12 40Painted, varnished or coated with plastics :
72 12 50Otherwise plated or coated :
72 12 60Clad :
72 13Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel :
72 13 10Containing indentations, ribs, grooves or other deformations produced during the rolling process
72 13 20Other, of free-cutting steel
72 13 91Other :
72 13 91Of circular cross-section measuring less than 14 mm in diameter :
72 13 99Other :
72 14Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling :
72 14 10Forged :
72 14 20Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling :
72 14 30Other, of free-cutting steel :
72 14 91Other :
72 14 91Of rectangular (other than square) cross-section :
72 14 99Other :
72 15Other bars and rods of iron or non-alloy steel :
72 15 10Of free-cutting steel, not further worked than cold-formed or cold-finished
72 15 50Other, not further worked than cold-formed or cold-finished :
72 15 90Other :
72 16Angles, shapes and sections of iron or non-alloy steel :
72 16 10U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
72 16 21L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm :
72 16 21L sections
72 16 22T sections
72 16 31U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more :
72 16 31U sections :
72 16 32I sections :
72 16 33H sections :
72 16 40L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more :
72 16 50Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded :
72 16 61Angles, shapes and sections, not further worked than cold-formed or cold-finished :
72 16 61Obtained from flat-rolled products :
72 16 69Other
72 16 91Other :
72 16 91Cold-formed or cold-finished from flat-rolled products :
72 16 99Other :
72 17Wire of iron or non-alloy steel :
72 17 10Not plated or coated, whether or not polished :
72 17 20Plated or coated with zinc :
72 17 30Plated or coated with other base metals :
72 17 90Other :
72 18III. STAINLESS STEEL :
72 18Stainless steel in ingots or other primary forms; semi-finished products of stainless steel :
72 18 10Ingots and other primary forms
72 18 91Other :
72 18 91Of rectangular (other than square) cross-section :
72 18 99Other :
72 19Flat-rolled products of stainless steel, of a width of 600 mm or more :
72 19 11Not further worked than hot-rolled, in coils :
72 19 11Of a thickness exceeding 10 mm :
72 19 12Of a thickness of 4,75 mm or more but not exceeding 10 mm :
72 19 13Of a thickness of 3 mm or more but less than 4,75 mm :
72 19 14Of a thickness of less than 3 mm :
72 19 21Not further worked than hot-rolled, not in coils :
72 19 21Of a thickness exceeding 10 mm :
72 19 22Of a thickness of 4,75 mm or more but not exceeding 10 mm :
72 19 23Of a thickness of 3 mm or more but less than 4,75 mm :
72 19 24Of a thickness of less than 3 mm :
72 19 31Not further worked than cold-rolled (cold-reduced) :
72 19 31Of a thickness of 4,75 mm or more :
72 19 32Of a thickness of 3 mm or more but less than 4,75 mm :
72 19 33Of a thickness exceeding 1 mm but less than 3 mm :
72 19 34Of a thickness of 0,5 mm or more but not exceeding 1 mm :
72 19 35Of a thickness of less than 0,5 mm :
72 19 90Other :
72 20Flat-rolled products of stainless steel, of a width of less than 600 mm :
72 20 11Not further worked than hot-rolled :
72 20 11Of a thickness of 4,75 mm or more :
72 20 12Of a thickness of less than 4,75 mm :
72 20 20Not further worked than cold-rolled (cold-reduced) :
72 20 90Other :
72 21Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel :
72 22Other bars and rods of stainless steel; angles, shapes and sections of stainless steel :
72 22 11Bars and rods, not further worked than hot-rolled, hot-drawn or extruded :
72 22 11Of circular cross-section :
72 22 19Other :
72 22 20Bars and rods, not further worked than cold-formed or cold-finished :
72 22 30Other bars and rods :
72 22 40Angles, shapes and sections :
72 23Wire of stainless steel :
72 24IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL :
72 24Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel :
72 24 10Ingots and other primary forms :
72 24 90Other :
72 25Flat-rolled products of other alloy steel, of a width of 600 mm or more :
72 25 11Of silicon-electrical steel :
72 25 11Grain-oriented :
72 25 19Other :
72 25 30Other, not further worked than hot-rolled, in coils :
72 25 40Other, not further worked than hot-rolled, not in coils :
72 25 50Other, not further worked than cold-rolled (cold-reduced) :
72 25 91Other :
72 25 91Electrolytically plated or coated with zinc :
72 25 92Otherwise plated or coated with zinc :
72 25 99Other :
72 26Flat-rolled products of other alloy steel, of a width of less than 600 mm :
72 26 11Of silicon-electrical steel :
72 26 11Grain-oriented :
72 26 19Other :
72 26 20Of high-speed steel :
72 26 91Other :
72 26 91Not further worked than hot-rolled :
72 26 92Not further worked than cold-rolled (cold-reduced) :
72 26 99Other :
72 27Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel :
72 27 10Of high-speed steel
72 27 20Of silico-manganese steel
72 27 90Other :
72 28Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel :
72 28 10Bars and rods, of high-speed steel :
72 28 20Bars and rods, of silico-manganese steel :
72 28 30Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded :
72 28 40Other bars and rods, not further worked than forged :
72 28 50Other bars and rods, not further worked than cold-formed or cold-finished :
72 28 60Other bars and rods :
72 28 70Angles, shapes and sections :
72 28 80Hollow drill bars and rods
72 29Wire of other alloy steel :
72 29 20Of silico-manganese steel :
72 29 90Other :

Other EU TARIC Chapters

Ch. 01Ch. 02Ch. 03Ch. 04Ch. 05Ch. 06Ch. 07Ch. 08Ch. 09Ch. 10Ch. 11Ch. 12Ch. 13Ch. 14Ch. 15Ch. 16Ch. 17Ch. 18Ch. 19Ch. 20View all →

Track Chapter 72 EU trade measures

Get alerted when duty rates change or new anti-dumping measures apply to Iron and Steel goods in the EU.

Join the Waitlist →