ECCN 1C992

a. Shaped charges "specially designed" for oil well operations, utilizing one charge functioning along a single axis, that upon detonation produce a hole, and a.1. Contain any formulation of controlled materials; a.2. Have only a uniform shaped conical liner with an included angle of 90 degrees or less; a.3. Contain more than 0.010 kg but less than or equal to 0.090 kg of controlled materials; and a.4. Have a diameter not exceeding 4.5 inches; b. Shaped charges "specially designed" for oil well operations containing less than or equal to 0.010 kg of controlled materials; c. Detonation cord or shock tubes containing less than or equal to 0.064 kg per meter (300 grains per foot) of controlled materials; d. Cartridge power devices, that contain less than or equal to 0.70 kg of controlled materials in the deflagration material; e. Detonators (electric or nonelectric) and assemblies thereof, that contain less than or equal to 0.01 kg of controlled materials; f. Igniters, that contain less than or equal to 0.01 kg of controlled materials; g. Oil well cartridges, that contain less than or equal to 0.015 kg of controlled energetic materials; h. Commercial cast or pressed boosters containing less than or equal to 1.0 kg of controlled materials; i. Commercial prefabricated slurries and emulsions containing less than or equal to 10.0 kg and less than or equal to thirty-five percent by weight of materials described on the USML; j. Cutters and severing tools containing less than or equal to 3.5 kg of controlled materials; k. Pyrotechnic devices when designed exclusively for commercial purposes (

(1) Items controlled by this entry ECCN 1C992 are those materials not controlled by ECCN 1C608 and not "subject to the ITAR." (2) For purposes of this entry, the term "controlled materials" means controlled energetic materials (see ECCNs 1C011, 1C111, 1C239, and 1C608; see also 22 CFR 121.1, Category V). (3) The individual energetic materials described on the USML, even when compounded with other materials, remain "subject to the ITAR" when not incorporated into explosive devices or charges. (4) Commercial prefabricated slurries and emulsions containing greater than 35% of energetic materials described on the USML are "subject to the ITAR." (5) For purposes of this entry, the mass of aluminum powder, potassium perchlorate, and any of the substances listed in the note to the USML (see 22 CFR 121.12) (such as ammonium pictrate, black powder, etc.) contained in commercial explosive devices and in the charges are omitted when determining the total mass of controlled material.

See EAR Part 772 (15 CFR 772) for complete definitions of terms used in the CCL.