Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket No. PHMSA-2011-0023; Amdt. No. 192-132] RIN 2137-AF39 Correction In Rule Document 2022-17031, appearing on pages 52224-52279, in the issue of Wednesday, August 24, 2022, make the following correction: On page 52267, in the third column, paragraph “(2)(i)” is corrected to read as set forth below. § 192.3 Definitions. [Corrected] * * * * * (2)(i) If the length of the wrinkle bend cannot be reliably determined, then w rinkle bend means a bend in the pipe where (h/D)*100 exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 exceeds (47000— S )/10,000 +1 for psi [324— S )/69 +1 for MPa] when S is greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more. * * * * * [ FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am] BILLING CODE 0099-10-P