Base
Rule2026-175832026-08-28

Airworthiness Directives; Various Helicopters

Transportation Department, Federal Aviation Administration

Abstract

The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B, EC225LP, AS 365 N3, and AS332L2 helicopters; all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters; all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters; and all Leonardo S.p.A. Model AB139, AW109SP, AW139, AW169, and AW189 helicopters. This AD was prompted by reports that certain rescue hoist assemblies may have been equipped with a non-conformant overload clutch assembly. This AD requires replacing each affected rescue hoist assembly with a serviceable rescue hoist assembly. This AD also prohibits installing an affected rescue hoist assembly unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.

Action & Dates

Action
Final rule.
Dates
This AD is effective October 2, 2026.
Effective Date
2026-10-02

CFR References

Topics

Air transportationAircraftAviation safetyIncorporation by referenceSafety

Document Excerpt

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2025-3986; Project Identifier MCAI-2025-00224-R; Amendment 39-23448; AD 2026-17-05] RIN 2120-AA64 ( printed page 55439) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B, EC225LP, AS 365 N3, and AS332L2 helicopters; all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters; all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters; and all Leonardo S.p.A. Model AB139, AW109SP, AW139, AW169, and AW189 helicopters. This AD was prompted by reports that certain rescue hoist assemblies may have been equipped with a non-conformant overload clutch assembly. This AD requires replacing each affected rescue hoist assembly with a serviceable rescue hoist assembly. This AD also prohibits installing an affected rescue hoist assembly unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective October 2, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 2, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-3986; or in pe

Read full document on FederalRegister.gov →

Related Documents

Other Federal Register documents from the same docket.

Full Document

Citation: 91 FR 55439