Transportation Department, Federal Aviation Administration
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B, EC 225LP, AS-365N3, and AS 332L2 helicopters; all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters; all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters; and all Leonardo S.p.A. Model AB139, AW109SP, AW139, AW169, and AW189 helicopters. This proposed AD was prompted by reports that certain rescue hoist assemblies may have been equipped with a non- conforming overload clutch assembly. This proposed AD would require replacing each affected rescue hoist assembly with a serviceable rescue hoist assembly. This proposed AD would also prohibit installing an affected rescue hoist assembly unless certain requirements are met. The FAA is proposing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2025-3986; Project Identifier MCAI-2025-00224-R] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B, EC 225LP, AS-365N3, and AS 332L2 helicopters; all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters; all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters; and all Leonardo S.p.A. Model AB139, AW109SP, AW139, AW169, and AW189 helicopters. This proposed AD was prompted by reports that certain rescue hoist assemblies may have been equipped with a non-conforming overload clutch assembly. This proposed AD would require replacing each affected rescue hoist assembly with a serviceable rescue hoist assembly. This proposed AD would also prohibit installing an affected rescue hoist assembly unless certain requirements are met. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this NPRM by January 5, 2026. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45 , by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov . Follow the instructions for submitting c…
Citation: 90 FR 52008
