Transportation Department, Federal Aviation Administration
The FAA is superseding Airworthiness Directive (AD) 2024-19- 14, which applied to certain The Boeing Company Model 777-200, 777- 200LR, 777-300ER, and 777F series airplanes. AD 2024-19-14 required repetitive inspections and bond resistance measurement of the bonding jumpers on the first fuel feed tube installed immediately forward of the wing front spar at the left and right main fuel tank penetrations and applicable corrective actions. This AD was prompted by a determination that additional inspections are required to address the unsafe condition. This AD requires repetitive detailed inspections (DETs), repetitive bond resistance measurement, and applicable on- condition actions. This AD also expands the applicability and requires revising the existing maintenance or inspection program, as applicable, to incorporate a certain airworthiness limitation. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2025-2546; Project Identifier AD-2025-01060-T; Amendment 39-23414; AD 2026-15-02] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2024-19-14, which applied to certain The Boeing Company Model 777-200, 777-200LR, 777-300ER, and 777F series airplanes. AD 2024-19-14 required repetitive inspections and bond resistance measurement of the bonding jumpers on the first fuel feed tube installed immediately forward of the wing front spar at the left and right main fuel tank penetrations and applicable corrective actions. This AD was prompted by a determination that additional inspections are required to address the unsafe condition. This AD requires repetitive detailed inspections (DETs), repetitive bond resistance measurement, and applicable on-condition actions. This AD also expands the applicability and requires revising the existing maintenance or inspection program, as applicable, to incorporate a certain airworthiness limitation. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective September 1, 2026. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of September 1, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket ( printed page 4…
Other Federal Register documents from the same docket.
Citation: 91 FR 47129
