Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, EC635T2+, MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters. This AD was prompted by a review of design data and the determination for recalculation of accumulated hoist boom cycles (cycles) and repetitive inspections. This AD requires determining the total cycles of certain hoist boom assemblies, inspecting those hoist boom assemblies, and depending on the results, taking corrective action. This AD also prohibits installing those hoist boom assemblies unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2025-0630; Project Identifier MCAI-2023-00518-R; Amendment 39-23131; AD 2025-18-04] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, EC635T2+, MBB-BK 117 C-2, MBB-BK 117 D-2, and MBB-BK 117 D-3 helicopters. This AD was prompted by a review of design data and the determination for recalculation of accumulated hoist boom cycles (cycles) and repetitive inspections. This AD requires determining the total cycles of certain hoist boom assemblies, inspecting those hoist boom assemblies, and depending on the results, taking corrective action. This AD also prohibits installing those hoist boom assemblies unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective October 21, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publications listed in this AD as of October 21, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0630; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continui…
Other Federal Register documents from the same docket.
Citation: 90 FR 44491
