Energy Conservation Program: Test Procedure for General Service Lamps

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Energy 10 CFR Part 430 [EERE-2024-BT-TP-0010] RIN 1904-AB99 AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final rule. SUMMARY: The U.S. Department of Energy (“DOE”) is adopting clarifications to the test procedures for general service lamps (“GSLs”) located in appendix W, appendix BB and appendix DD. Specifically, DOE is clarifying instructions that GSLs must not be tested as colored lamps and that lamps with additional components that do not affect light output must be turned off during testing. The clarifications also specify that non-integrated lamps be tested with a fluorescent lamp ballast, high intensity discharge (“HID”) lamp ballast or external light-emitting diode (“LED”) driver selected based on compatibility lists and availability; and provide specifications regarding the starting method, ballast factor, and number of lamps. This rulemaking is limited in scope and is providing clarifications to the current test procedures that are required for certification of compliance with existing applicable GSL energy conservation standards. Further, this rulemaking does not satisfy the Energy Policy and Conservation Act (“EPCA”) requirement that, at least once every 7 years, DOE review the test procedures for GSLs. DATES: The effective date of this rule is February 18, 2025. The amendments will be mandatory for product testing starting July 15, 2025. The incorpo…