Base
N3664452026-11-10NY

RE: The tariff classification of ceramic ball bearings from Denmark.

U.S. Customs and Border Protection · CROSS Database · 1 HTS code referenced

Cross-Source Intelligence

Primary HTS Code

6909.19.5010

Compare All →

Court Cases

6 cases

CIT & Federal Circuit

Ruling Age

12 days

Data compiled from CBP CROSS Rulings, CourtListener (CIT/CAFC) · As of 2026-11-22 · Updates real-time

Summary

RE: The tariff classification of ceramic ball bearings from Denmark.

Ruling Text

U.S. Department of Homeland Security U.S. Customs and Border Protection National Commodity Specialist Division One World Trade Center, Suite 51.201 New York, NY 10007 U.S. Customs and Border Protection N366445 November 10, 2026 CLA-2-69:OT:RR:NC:N1:128 CATEGORY: Classification TARIFF NO.: 6909.19.5010 Mr. Mark Ian Millennium CeramicSpeed A/S Noergaardsvej 3 Holstebro 7500 Denmark RE: The tariff classification of ceramic ball bearings from Denmark. Dear Mr. Millennium: In your letter dated October 27, 2026, you requested a tariff classification ruling. The merchandise under consideration is ball bearings used in industrial machinery, aerospace, sporting equipment, and bicycle applications. They are identified as Insulate 090 6318-2Z/CSB.C3 SC, Xtreme 110 QJ322 N2 MA/CSB.C2L.BO JC-US, Custom Build 081 61816/CES6025_rev02, CorrotecX 012 4201/CSB.C3 P4 FB ASQ, and Hub Kit ENVE Innerdrive XD/XDR. The Insulate 090 6318-2Z/CSB.C3 SC consists of silicon nitride ceramic ball bearings held in a polyamide retainer fitted to steel races, and has a diameter of 28.575 millimeters. The Xtreme 110 QJ322 N2 MA/CSB.C2L.BO JC-US is comprised of silicon nitride ceramic ball bearings held in a polyamide cage fitted to steel races, and has a diameter of 38.1 millimeters. The CustomBuild 081 61816/CES6025_rev02 is made up of silicon nitride ceramic ball bearings held in a polyether ether ketone cage fitted to steel races, and has a diameter of 5.953 millimeters. The CorrotecX 012 4201/CSB.C3 P4 FB ASQ is composed of silicon nitride ceramic ball bearings held in a polyamide cage fitted to steel racers, and has a diameter of 5.953 millimeters. The Hub Kit ENVE Innerdrive XD/XDR is a bearing kit designed for use in bicycle hubs. It includes one CeramicSpeed Bearing 17287 and one CeramicSpeed Bearing 61902, which are imported packaged together. Both bearings are made of silicon nitride ceramic ball bearings held in a TN9 cage fitted to steel racers. The 17287 bearing measures 3.175 millimeters in diameter, while the 61902 bearing measures 3.969 millimeters in diameter. From the information you provided, the silicon nitride ceramic of which all of these products are made is a non-porcelain, non-china ceramic which has a Mohs hardness of less than 9. The applicable subheading for the Insulate 090 6318-2Z/CSB.C3 SC, Xtreme 110 QJ322 N2 MA/CSB.C2L.BO JC-US, CustomBuild 081 61816/CES6025_rev02, CorrotecX 012 4201/CSB.C3 P4 FB ASQ, and Hub Kit ENVE Innerdrive XD/XDR will be 6909.19.5010, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Ceramic wares for laboratory, chemical or other technical uses…: Ceramic wares for laboratory, chemical or other technical uses: Other: Other: Ceramic bearings.” The general rate of duty will be 4 percent ad valorem. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs. For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at https://www.cbp.gov/trade/programs-administration/trade-remedies. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and complete in every material respect. In the event that the facts are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2. Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic verification by CBP. This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact National Import Specialist Nicole Sullivan at nicole.d.sullivan@cbp.dhs.gov. Sincerely, (for) James P. Forkan Director National Commodity Specialist Division