U.S. Customs and Border Protection · CROSS Database · 1 HTS code referenced
RE: The tariff classification, country of origin, and eligibility for preferential treatment under the United States-Australia Free Trade Agreement (UAFTA) of reusable plastic templates.
U.S. Department of Homeland Security U.S. Customs and Border Protection National Commodity Specialist Division One World Trade Center, Suite 51.201 New York, NY 10007 U.S. Customs and Border Protection N366327 November 13, 2026 CLA-2-39:OT:RR:NC:N4:415 CATEGORY: Classification; Origin; Trade Programs TARIFF NO.: 3926.90.9989 Dannielle L. Reynolds The Quilting Patch 15d 31 Norfolk Avenue South Nowra, NSW 2541 Australia RE: The tariff classification, country of origin, and eligibility for preferential treatment under the United States-Australia Free Trade Agreement (UAFTA) of reusable plastic templates. Dear Mrs. Reynolds: In your letter dated October 23, 2026, you requested a ruling regarding tariff classification, country of origin, and eligibility for preferential treatment under the UAFTA. Images were provided in lieu of samples. The products under consideration are described as Eppiflex English paper piecing (EPP) templates. They consist of uncoated polyethylene terephthalate (PET) film that is laser-cut into geometric shapes including hexagons, diamonds, triangles, clamshells, and other specialized patchwork shapes. These templates are used to support fabric during hand sewing for patchwork and quilt making projects. They are subsequently removed and reused. The templates are sold as basic shape packs, assorted template packs, and project-specific kits. Basic packs generally contain templates and a printed cover sheet. Other packs may include layout diagrams, printed patterns, or multi-page project instructions. We hold the opinion that the packs and kits containing additional items, such as printed patterns and instructions, would still be classified by the templates as they would impart the essential character to those sets, General Rule of Interpretation 3(b) noted. As the Eppiflex EPP templates, assorted packs, and project kits would be considered articles of plastic, and as they are not more specifically provided for elsewhere, the applicable subheading will be 3926.90.9989, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “[o]ther articles of plastics and articles of other materials of headings 3901 to 3914: [o]ther: [o]ther: [o]ther.” The column one, general rate of duty is 5.3 percent ad valorem. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. We will now consider the country of origin and whether this merchandise is eligible for preferential treatment under the UAFTA. Your submission states the templates are manufactured from clear, uncoated PET film. The film is imported directly from China in rolls. All manufacturing of the finished templates takes place in Australia, where the imported film is cut into sheets and processed using computer-controlled precision laser-cutting equipment to produce the required geometric shapes and sizes. The finished templates are then counted, sorted, and packaged for retail and wholesale distribution. As the PET film is sourced from China, when determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (HQ) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In order to determine whether a substantial transformation occurs when components are assembled into completed products, all factors such as the components used to create the product and manufacturing processes that these components undergo are considered in order to determine whether a product with a new name, character, and use has been produced. No one factor is decisive, and assembly/manufacturing operations that are minimal will generally not result in a substantial transformation. We hold the opinion that the Chinese origin PET film is substantially transformed to become new articles having a new name, character, or use after being processed in Australia. Accordingly, the country of origin for these templates, assorted packs, and project kits will be Australia. The United States-Australia Free Trade Agreement was signed on May 18, 2004, and entered into force on January 1, 2005, as approved and implemented by the UAFTA Implementation Act, Pub. L. 108-286, 118 Stat. 919 (August 3, 2004). General Note (GN) 28(b), HTSUS, provides, in pertinent part: For the purposes of this note, subject to the provisions of subdivisions (c), (d), (m), and (n) thereof, a good imported into the customs territory of the United States is eligible for treatment as an originating good of a UAFTA country under the terms of this note only if -- (i) The good is a good wholly obtained or produced entirely in the territory of Australia or of the United States, or both; (ii) the good was produced entirely in the territory of Australia or of the United States, or both, and -- (A) each of the nonoriginating materials used in the production of the good undergoes an applicable change in tariff classification specified in subdivision (n) of this note; (B) the good otherwise satisfies any applicable regional value content requirement referred to in subdivision (n) of this note; or (C) the good meets any other requirements specified in subdivision (n) of this note; and such good satisfies all other applicable requirements of this note …. As all the materials do not originate from Australia or the United States, these products would not be considered to be “wholly obtained or produced” as set forth in GN 28(b)(i). Therefore, we must determine whether the templates would satisfy the applicable change in tariff classification. As indicated above, the templates, assorted packs, and project kits would be classified in heading 3926, HTSUS. The applicable rule set forth in GN 28(n) is: A change to headings 3922 through 3926 from any other heading. Based on the facts provided, the Chinese origin PET film is classified outside of heading 3926, so the templates would satisfy the applicable tariff shift rule. Accordingly, the merchandise would be entitled to a free rate of duty under the UAFTA upon compliance with all applicable laws, regulations, and agreements. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs. For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at https://www.cbp.gov/trade/programs-administration/trade-remedies. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and complete in every material respect. In the event that the facts are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2. Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic verification by CBP. This ruling is being issued under the provisions of Part 177 of the CBP Regulations (19 CFR 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact National Import Specialist Kristopher Burton at kristopher.burton@cbp.dhs.gov. Sincerely, (for) James P. Forkan Director National Commodity Specialist Division