U.S. Customs and Border Protection · CROSS Database · 1 HTS code referenced
RE: The tariff classification of a valve body casting from Denmark
U.S. Department of Homeland Security U.S. Customs and Border Protection National Commodity Specialist Division One World Trade Center, Suite 51.201 New York, NY 10007 U.S. Customs and Border Protection N365876 November 3, 2026 CLA-2-84:OT:RR:NC:N1:102 CATEGORY: Classification TARIFF NO.: 8481.90.9020 Thomas Jorgensen KP Components Inc. 117 Sheriff Mill Road Easley, SC 29642 RE: The tariff classification of a valve body casting from Denmark Dear Mr. Jorgensen: In your letter dated October 8, 2026, you requested a tariff classification ruling. The product at issue is a rectangular valve body casting. The ductile iron casting will be imported with engineered cavities corresponding to the functional elements of the PVB32 hydraulic directional control valve. The cored passages and contours function as hydraulic fluid paths, while its exterior includes specific openings for fluid passages, electrical and mechanical component installations, and the mounting of an actuating handle assembly. Subsequent to importation, the casting undergoes machining processes to function as a housing (part number 11119177) for a spool valve assembly. Merchandise is classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) in accordance with the General Rules of Interpretation (GRIs). GRI 1 states in part that for legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes. GRI 2(a) extends the scope of the HTSUS headings to include unfinished parts, provided the unfinished parts have the essential character of the finished parts. GRI 2(a) further states that: Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as entered, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also include a reference to that article complete or finished (or failing to be classified as complete or finished by virtue of this rule), entered unassembled or disassembled. In addition, Explanatory Note (EN) II under GRI 2(a) states that: The provisions of this rule also apply to blanks unless these are specified in a particular heading. The term “blank” means an article, not ready for direct use, having the approximate shape or outline of the finished article or part, and which can only be used, other than in exceptional cases, for completion into the finished article or part. Semi-manufactures not yet having the essential shape of the finished articles (such as is generally the case with bars, discs, tubes, etc.) are not regarded as “blanks.” Accordingly, two criteria which an article must meet in order to be classified as a blank for purposes of GRI 2(a) are (1) it must possess the approximate shape or outline of the finished article, and (2) the sole use must be for completion into the finished article. In this case, GRI 2(a) is applicable to the valve body casting when imported in a pre-machined condition, as it will satisfy the criteria stated above. It will have the approximate shape or outline of a finalized valve body at the time of importation. It cannot be used for any other purpose. In a pre-machined condition, the casting will be readily recognizable as the finished article, and there is nothing to suggest that in this condition, the casting has any practical use other than as a finished valve body. Therefore, this office finds that the casting, when imported in a pre-machined condition, has the essential character of a complete or finished good classified within heading 8481. The applicable subheading for the valve body casting will be 8481.90.9020, HTSUS, which provides for Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof: Parts: Other: Of valves of subheading 8481.20: Valve bodies. The general rate of duty will be Free. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs. For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and the Trade Remedies page at https://www.cbp.gov/trade/programs-administration/trade-remedies. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and complete in every material respect. In the event that the facts are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2. Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic verification by CBP. This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact National Import Specialist Sandra Martinez at sandra.martinez@cbp.dhs.gov. Sincerely, (for) James P. Forkan Director National Commodity Specialist Division