The tariff classification of folding portable ramps made in China

N310627 April 6, 2020 CLA-2-76:OT:RR:NC:N1:113 CATEGORY: Classification TARIFF NO.: 7616.99.5190; 9817.00.96 Ms. Desiree L. Pasbrig DiscountRamps.com LLC N102 W19400 Willow Creek Way Germantown, WI 53022 RE: The tariff classification of folding portable ramps made in China Dear Ms. Pasbrig: In your letter dated March 11, 2020, you requested a tariff classification ruling on folding portable ramps. Descriptions and photographs of the subject ramps were submitted for our review. The articles under consideration are identified in your letter as the PPSF Series Folding Portable Ramps with Punch Plate Traction and an 800 pound weight capacity. The ramps under consideration include Model Numbers PPSF02 that measures 2’ long, PPSF03 that measures 3’ long, PPSF04 that measures 4’ long, PPSF05 that measures 5’ long and PPSF06 that measures 6’ long. Each ramp measures approximately 30 inches in width. The PPSF ramps are made from durable, lightweight, punch plate aluminum. These ramps fit standard doorway openings and each ramp has a pre-drilled hole at the top edge that allows the user to mount the ramp securely to the surface. Hardware is not included due to the variety of possible surfaces to mount to. These Silver Spring folding portable traction wheelchair ramps have been designed with wheeled mobility aids to provide safe and easy access over rises like steps. The traction punch plate surface provides no-slip grip even in wet or snowy conditions making these ramps suitable for outdoor use. The side rails keep wheels safely on the ramp and are sloped at the top to allow doors to clear. The PPSF ramps are intended to be portable. They are fitted with hinges down the center to fold to half the normal width, and carry handles that make transport easy. In addition, the hinges can be pulled apart into two separate ramp pieces, each with a carry handle, for two-handed carrying. A storage/carry bag also comes with the ramps. The applicable subheading for the PPSF Series Folding Portable Ramps with Punch Plate Traction that include Model Numbers PPSF02, PPSF03, PPSF04, PPSF05 and PPSF06 will be 7616.99.5190, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other articles of aluminum, other, other, other, other, other, other. The rate of duty will be 2.5 percent ad valorem.  In your submission you requested consideration of a secondary classification for the subject portable ramps under 9817.00.96, HTSUS, which applies to articles and parts of articles specifically designed or adapted for the use or benefit of the permanently or chronically physically or mentally handicapped. Chapter 98, Subchapter XVII, U.S. Note 4(a), HTSUS, defines the term blind or other physically or mentally handicapped persons as including “any person suffering from a permanent or chronic physical or mental impairment which substantially limits one or more major life activities, such as caring for one's self, performing manual tasks, walking, seeing, hearing, speaking, breathing, learning, or working.” The primary issue is whether the article is specially designed or adapted for the use or benefit of the handicapped within the meaning of Nairobi Protocol. Although the legislative history of the Nairobi Protocol discusses the concerns of Congress that the design, modification or adaptation of an article must be significant so as to clearly render the article for use by handicapped individuals, no specific definition of these terms was established by Congress. Since it is difficult to establish a clear definition of what is specially designed or adapted, various factors must be utilized on a case-by-case basis to determine whether a given article is specially designed or adapted within the meaning of this statute. In T.D. 92-77, dated August 3, 1992 (26 Cust. Bull. 35, dated August 26, 1992), Customs set forth its position regarding certain issues arising under the Nairobi Protocol. The first issue concerned the interpretation of the term specially designed or adapted. Customs pointed out that a primary factor to be considered in determining whether an article was specially designed and adapted was whether the article was easily distinguishable, by properties of the design and the corresponding use specific to this unique design, from articles useful to non-handicapped individuals. Therefore, if an article is solely dedicated for use by the handicapped it is Customs position that this would be conclusive evidence that the article is specially designed or adapted for the handicapped for purposes of the Nairobi Protocol. You stated that the PPSF Series Folding Portable Ramps with Punch Plate Traction “provide a smooth rolling surface that facilitates access to buildings for people who are using rolling devices to assist their movement – either wheelchairs, walkers, or scooters; whether manually operated or powered.” In HQ 557734 dated April 18, 1994, CBP determined that walkers are specially designed and adapted for handicap use, and HQ 557712 dated June 27, 1994, and HQ 557798 dated June 17, 1994, established that various wheelchairs are designed and adapted for handicap use. We note that the subject ramps facilitate the safe movement of walkers, wheelchairs and scooters in and out of buildings and are marketed to the chronically disabled. In HQ 556449, dated May 5, 1992, CBP set forth five factors it would consider in determining whether an article is specially designed or adapted for the use or benefit of handicapped persons.  These factors include:  (1) the physical properties of the article itself (i.e., whether the article is easily distinguishable by properties of the design, form, and the corresponding use specific to this unique design, from articles useful to non-handicapped persons); (2) whether any characteristics are present that create a substantial probability of use by the chronically handicapped so that the article is easily distinguishable from articles useful to the general public and any use thereof by the general public is so improbable that it would be fugitive; (3) whether articles are imported by manufacturers or distributors recognized or proven to be involved in this class or kind of articles for the handicapped; (4) whether the articles are sold in specialty stores which serve handicapped individuals; and, (5) whether the condition of the articles at the time of importation indicates that these articles are for the handicapped. Based on the information provided, it is the opinion of this office that the PPSF Series Folding Portable Ramps with Punch Plate Traction under consideration are specifically designed for use by the handicapped for secondary classification purposes. In our view, the ramps satisfy the description set forth in Chapter 98, Subchapter XVII, U.S. Note 4(a). Therefore, we agree that a secondary classification would apply to the folding portable ramps under 9817.00.96, HTSUS, and will be free of duty and the Merchandise Processing Fee (MPF) upon importation into the United States. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on the World Wide Web at https://hts.usitc.gov/current.This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177).A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Ann Taub@cbp.dhs.gov.Sincerely,Steven A. MackDirectorNational Commodity Specialist Division