Base
H2733882016-11-14Headquarters

Internal Advice Request; Classification of treated fumed silicas

U.S. Customs and Border Protection · CROSS Database · 1 HTS code referenced

Summary

Internal Advice Request; Classification of treated fumed silicas

Ruling Text

HQ H273388 November 14, 2016 CLA-2 OT:RR:CTF:TCM H273388 NCD CATEGORY: Classification TARIFF NO.: 3824.90.9295 Center Director Center of Excellence and Expertise for Machinery U.S. Customs and Border Protection 109 Shiloh Dr., Suite 300 Laredo, TX 78045 Attn: Juan Porras, Import Specialist RE: Internal Advice Request; Classification of treated fumed silicas Dear Port Director: This is in response to a January 7, 2016 request by the Center of Excellence and Expertise for Machinery (“CEE”) for internal advice as to the proper classification of various treated fumed silica products under the Harmonized Tariff Schedule of the United States (HTSUS). The CEE submitted its request upon its receipt of a July 17, 2015 request by Xerox Corporation (“Xerox”) that the CEE seek internal advice from our office pursuant to 19 C.F.R. §177.11(b). We note at the outset that merchandise identical to that at issue was previously classified by our office in Headquarters Ruling Letter (HQ) H233358, issued to the Port of Huron on December 13, 2013. In its July 17, 2015 request, Xerox asserts that the determination reached in HQ H233358 is incorrect, insofar as it does not account for novel arguments set forth in Xerox’s request, and that that decision should accordingly be reconsidered. As such, the below determination sets forth our position as to the arguments presented by Xerox, to the correctness of HQ H233358 in view of those arguments, and to the proper classification of the treated fumed silicas at issue in both HQ H233358 and the instant case. FACTS: The subject products, which are produced by various manufacturers, all consist of fumed (i.e., pyrogenic) silicas that have been chemically modified so as to increase their hydrophobicity, or resistance to “wetting” by water. Fumed silica (SiO2+4HCl) is a unique form of silicon dioxide that results from the reaction of the silicon tetrachloride (SiCl4) with hydrogen (2H2) and oxygen (O2). It is obtained by the pyrolysis of silicon tetrachloride in a hydrogen-oxygen flame, during which individual silicon dioxide particles collide and sinter together to form branch-like “aggregates” and, subsequently, longer chain-like entanglements of aggregates referred to as “agglomerates.” Due to the presence of highly reactive silanol (SiOH) groups along the particles’ outer surfaces, agglomerates of silica particles have a tendency to bond to each other. Consequently, when dispersed in a non-polar liquid, which facilitates this bonding, the agglomerates form a three-dimensional structure that effectively thickens the liquid in which the fumed silica is dispersed. However, the thickening process can be reversed, and the flow of the liquid medium correspondingly increased, by the application of “shear” forces like stirring or mixing upon the liquid. This is because shear forces break down the three-dimensional agglomerated structures and reduce the component fumed silica particles to their aggregate structures. Fumed silica thus provides both viscosity-increasing and thixotropic applications when introduced to non-polar liquids, and accordingly functions as an effective rheology agent in such substances. In contrast, it performs neither of these applications effectively when dispersed in polar liquids. This is because its particular surface chemistry renders it hydrophilic, or susceptible to “wetting,” in its natural state. Specifically, the surface silanol groups attract and bond with hydrogen atoms in surrounding polar media, rather than with each other. This in turn inhibits the capacity of the fumed silica aggregates to agglomerate into three-dimensional structures that impart thickening behavior. Therefore, when placed in a polar medium like water, fumed silica will not agglomerate and increase the viscosity of the medium. Despite its natural hydrophilicity, silica can be chemically modified so as to impart it with hydrophobic properties. Chemical modification typically entails treatment of the fumed silica with organosilicon compounds, resulting in the deposition of hydrocarbon moieties on the silica aggregates’ outer surfaces. Once deposited, the hydrocarbon moieties bond with a portion of the surface silanol groups, in effect converting these to inert siloxane (SiO(CH3)2) groups. Unlike the silanol groups, the siloxane groups lack the propensity to bond with hydrogen molecules in surrounding media, and their presence consequently increases the hydrophobicity of the silica particles. Notably, however, silicas that have undergone this treatment retain at least some – i.e., 30 to 70 percent, according to Xerox – of their unreacted surface silanol groups. As such, while referred to commercially as hydrophobic fumed silica, they are not in fact wholly hydrophobic. In the instant case, the degree to which each of the subject treated fumed silicas have been modified is unknown. ISSUE: Whether the subject treated fumed silicas are properly classified in subheading 2811.22.50, HTSUS, as “other” silicon dioxide, in subheading 3824.90.39, HTSUS, as chemical preparations consisting of mixtures of two or more inorganic compounds, or in subheading 3824.90.92, HTSUS, as “other” chemical preparations. LAW AND ANALYSIS: Merchandise imported into the United States is classified under the HTSUSA. Tariff classification is governed by the principles set forth in the General Rules of Interpretation (GRIs) and, in the absence of special language or context which requires otherwise, by the Additional U.S. Rules of Interpretation. The GRIs and the Additional U.S. Rules of Interpretation are part of the HTSUS and are to be considered statutory provisions of law for all purposes. GRI 1 requires that classification be determined first according to the terms of the headings of the tariff schedule and any relative section or chapter notes. In the event that the goods cannot be classified solely on the basis of GRI 1, and if the heading and legal notes do not otherwise require, the remaining GRIs 2 through 6 may then be applied in order. GRI 6 requires that the classification of goods in the subheadings of headings shall be determined according to the terms of those subheadings, any related subheading notes and, mutatis mutandis, to GRIs 1 through 5. In understanding the language of the HTSUS, the Explanatory Notes (ENs) of the Harmonized Commodity Description and Coding System, which constitute the official interpretation of the HTSUS at the international level, may be utilized. The ENs, although not dispositive or legally binding, provide a commentary on the scope of each heading, and are generally indicative of the proper interpretation of the HTSUS. See T.D. 89-80, 54 Fed. Reg. 35127 (August 23, 1989). The 2016 HTSUS provisions under consideration in the instant case are as follows: 2811 Other inorganic acids and other inorganic oxygen compounds of nonmetals: 2811.22 Other inorganic oxygen compounds of nonmetals: Silicon dioxide: 2811.22.50 Other 3824 Prepared binders for foundry molds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: 3824.90 Other: Other: Mixtures of two or more inorganic compounds: 3824.90.39 Other Other: Other: 3824.90.92 Other As a preliminary matter, if the subject treated fumed silicas are prima facie classifiable in heading 2811, HTSUS, they are precluded from classification in heading 3824, HTSUS. Chapter 28, Note 1, HTSUS (“Except where the context otherwise requires, the headings of this chapter apply only to…separate chemically defined organic compounds.”); Chapter 38, Note 1, HTSUS (“This chapter does not cover…separate chemically defined elements or compounds…”). Accordingly, we initially consider whether the subject fumed silicas are prima facie classifiable in heading 2811, HTSUS. Heading 2811, HTSUS, provides, inter alia, for “other inorganic oxygen compounds of nonmetals.” Note 1 to Chapter 28 states, in pertinent part, as follows: Except where the context otherwise requires, the headings of this Chapter apply only to: Separate chemically defined inorganic compounds, whether or not containing impurities; * * * The products mentioned in (a), (b), or (c) above with an added stabilizer (including an anticaking agent) necessary for their preservation or transport… The EN to Chapter 28 states, in pertinent part, as follows: GENERAL A separate chemically defined compound is a substance which consists of one molecular species (e.g., covalent or ionic) whose composition is defined by a constant ratio of elements and can be represented by a definitive structural diagram. In a crystal lattice, the molecular species corresponds to the repeating unit cell. The elements of a separate chemically defined compound combine in a specific characteristic proportion determined by the valency and the bonding requirements of the individual atoms. The proportion of each element is constant and specific to each compound and it is therefore said to be stoichiometric. Small deviations in the stoichiometric ratios can occur because of gaps or insertions in the crystal lattice. These compounds are described as quasi-stoichiometric and are permitted as separate chemically defined compounds provided that the deviations have not been intentionally created. (A) Chemically defined elements and compounds. (Note 1) Separate chemical elements and separate chemically defined compounds containing impurities, or dissolved in water, remain classified in Chapter 28. The term “impurities” applies exclusively to substances whose presence in the single chemical compound results solely and directly from the manufacturing process (including purification). * * * It should be noted, however, that such substances are not in all cases regarded as “impurities” permitted under Note 1(a). When such substances are deliberately left in the product with a view to rendering it particularly suitable for specific use rather than for general use, they are not regarded as permissible impurities. Separate chemically defined elements and compounds as described above, put up with an added stabiliser necessary for their preservation or transport, remain classified in this Chapter. For example, hydrogen peroxide stabilised by addition of boric acid remains classified in heading 28.47; but sodium peroxide mixed with catalysts (for production of hydrogen peroxide) is excluded from Chapter 28 and is classified in heading 38.24. Products added to certain chemicals to keep them in their original physical state are also to be regarded as stabilisers, provided that the quantity added in no case exceeds that necessary to achieve the desired result and that the addition does not alter the character of the basic product and render it particularly suitable for specific use rather than for general use. By application of these provisions anti-caking agents may be added to the products of this Chapter. Such products with added water-repellents are, on the other hand, excluded since such agents modify the original characteristics of the products. Pursuant to Note 1 to Chapter 28, headings of the chapter apply both to separately defined compounds and to such compounds to which stabilizers necessary for the preservation or transport of the compounds have been added. As to the former, the EN to Chapter 28 defines “separately defined compound” as a substance in which the stoichiometric ratio of constituent elements is constant, and in which any impurities, in the form of deviations from this ratio, are not deliberately engineered. In Degussa II, the U.S. Court of Appeals for the Federal Circuit (C.A.F.C.) applied this definition to fumed silicas whose surfaces had been modified by the deposition of hydrocarbon moieties so as to increase the particles’ surface hydrophobicity. 508 F.3d at 1046; see also Degussa I, 452 F. Supp. 2d at 1314-15 (establishing that the silicas at issue had been produced by pyrolysis and the subsequent incorporation of hydrocarbon moieties). In so doing, the court ruled that because the hydrocarbon moieties rendered the silicon dioxide non-stoichiometric, and because their introduction was by deliberate design, they could not be considered impurities for purposes of Note 1(a) to Chapter 28. Degussa II, 508 F.3d at 1049-50. In effect, the court held, the silicon dioxide could not be described as a “separately defined inorganic compound” within the meaning of the note. Id. at 1050. Here, like in Degussa, the subject merchandise consists of fumed silicas that have been treated through the intentional addition of hydrocarbon moieties to its particles’ outer surfaces. The introduction of the hydrocarbon moieties results in the alteration of the particles’ surface stoichiometry, insofar as the naturally-occurring silanol groups are replaced with siloxane groups. Because these alterations to the molecular structure are deliberate, the hydrophobic fumed silicas cannot be considered separately defined compounds. In fact, as we noted in HQ H233358, supra, the hydrophobic fumed silica is substantially similar, if not outright identical, to the modified silicon dioxide particles that the court deemed outside the scope of Note 1(a) in Degussa. Accordingly, in light of the court’s decision in that case, it is beyond dispute that the subject hydrophobic fumed silicas do not satisfy Note 1(a) to Chapter 28. Xerox does not challenge the C.A.F.C.’s determination that the hydrocarbon moieties do not qualify as impurities within the meaning of Note 1(a). Rather, the crux of its argument is that the moieties constitute permissible stabilizers, as the C.A.F.C. failed to recognize, and that the subject treated fumed silicas therefore fall within the ambit of Note 1(d) to Chapter 28. As stated above, Note 1(d) applies to separate chemically defined compounds to which stabilizers necessary for preservation or transport have been added. The EN to Chapter 28 indicates that stabilizers within the meaning of Note 1(d) include additives designed to keep the compound in its original physical state, but do not include additives that alter the compound’s character and thereby render it particularly suitable for a specific use. In illustrating the distinction between permissible stabilizers and impermissible additives, the EN further provides that compounds to which water-repellants have been added are of the latter type because the addition modifies the original characteristics of the compound. Here, the subject fumed silicas are supplemented with hydrocarbon moieties for the express purpose of increasing the silica particles’ hydrophobicity. Xerox asserts that this treatment is necessary to prevent absorption of atmospheric moisture that can severely diminish, or outright eliminate, their rheological applications. However, we have not located any sources, either in Xerox’s submission or in the course of our own research, indicating that this is even one of the objectives of the treatment. Moreover, according to Degussa II, the addition of the hydrocarbon moieties alters the character of the fumed silica and renders it suitable for specific use. See 508 F.3d at 1048-49. Specifically, in addressing whether the moieties qualified as impurities, the court found that they impart on the silica a degree of water repellency that enables its incorporation into certain organic solvents and polymers. See id.  Xerox acknowledges that the C.A.F.C. has addressed this issue, but contends that it erred in doing so because it mistakenly equated hydrophobicity, which denotes “wettability”, with water repellency. Because the two properties are not co-extensive, Xerox’s argument goes, hydrocarbon moieties that increase hydrophobicity cannot be characterized as water repellents. However, the court considered this purported distinction in Degussa II, and ultimately rejected it on the grounds that the manufacturer’s own product literature, some of which applies to the subject merchandise, indicates that treated fumed silica does in fact have water-resistant properties. The court’s finding is consistent with our own research, which indicates that hydrophobicity and water repellency are often equated or used interchangeably. See Richard J. Lewis, Sr., Hawley’s Condensed Chemical Dictionary 669 (15th ed. 2007) [hereinafter Hawley’s] (defining hydrophobic as “antagonistic to water”); David Chandler, “Explained: Hydrophobic and hydrophilic, Massachusetts Institute of Technology News, July 16, 2013, http://news.mit.edu/2013/hydrophobic-and-hydrophilic-explained-0716 (“Materials…that naturally repel water, causing droplets to form, are known as hydrophobic.”). In view of this, we find that the subject treated fumed silica has in fact been supplemented with water repellents within the meaning of the EN to Chapter 28, and that it consequently falls outside the scope of Note 1(d) to Chapter 28. See also HQ H233358, supra (reaching an identical conclusion). Finally, even if water repellency could be considered a misnomer here, it is nonetheless clear that the fumed silica undergoes transformations in character and use upon deposition of the hydrocarbon moieties. As Xerox itself states, this step renders hydrophilic silica hydrophobic, thereby altering the fundamental nature of its reactivity to water and other polar liquids. Moreover, our review of myriad technical and commercial sources unequivocally indicates that while both hydrophilic fumed silicas and hydrophobic fumed silicas offer utility to purchasers, the applications of the former are wholly distinct from those of the latter. For example, left untreated, fumed silicas provide effective rheology control in non-polar liquids due to their aforementioned propensity to form three-dimensional “thickening” structures when dispersed in polar liquids, as well their susceptibility to “thinning” shear forces. See Fumed Silica Controls Rheology of Adhesives and Sealants, Adhesives & Sealants Indus., Oct. 5, 2000, http://www.adhesivesmag.com/articles/85787-fumed-silica-controls-rheology-of-adhesives-and-sealants [ASI]. As a result, they are particularly suitable for use as rheology agents in non-polar adhesives, coatings, sealants, and cosmetics, among other substances. See id. They are accordingly advertised and made available for purchase as such by various manufacturers. See, e.g., Cabot Corp., CAB-O-SIL® EH-5 Fumed Silica (2014). In contrast, hydrophobic fumed silicas, while less efficient thickeners than untreated fumed silicas, lend advantageous flow and leveling properties and heightened water repellency and anti-corrosiveness to the substances to which they are incorporated. See Successful Use of Fumed Silica in Liquid Systems, Paint & Coatings Indus., Oct. 1, 2001, http://www.pcimag.com/articles/86041-successful-use-of-fumed-silica-in-liquid-systems; Cabot Corp., CAB-O-SIL® TS-610 Fumed Silica (2014). As such, they are specifically selected for use in cosmetics products and coatings in which those properties, as well as lower viscosities, are preferable. Evonik Indus., Successful use of AEROSIL® fumed silica in liquid systems: Technical Information 1279 (2015), https://www.aerosil.com/sites/lists/IM/Documents/TI-1279-Successful-use-of-AEROSIL-in-liquid-systems-EN.pdf. Additionally, whereas untreated fumed silicas are wholly ineffective in polar liquids, modified fumed silicas are able to form three-dimensional agglomerations, and thus provide thickening and thixotropic functionality, in such liquids. See Francisco J. Galindo-Rosales et. al., Shear-thickening behavior of Aerosil® R816 nanoparticles suspensions in polar organic liquids, 48 Rheologica Acta 700 (2009); ASI, supra, at 7. They are accordingly promoted and sold as rheology agents