Transportation Department, Federal Aviation Administration
The FAA proposes to supersede Airworthiness Directive (AD) 2025-09-07, which applies to certain Airbus SAS Model A330-243, -243F, -841, and -941 airplanes. AD 2025-09-07 requires revising the existing airplane flight manual (AFM) by providing instructions to address dual loss of radio management panel (RMP) data synchronization, and the existing minimum equipment list (MEL) by removing relief for an inoperative RMP 3. Since the FAA issued AD 2025-09-07, a modification that addresses the unsafe condition has been developed. This proposed AD would continue to require the actions specified in AD 2025-09-07 and would require modifying the airplane. This proposed AD also reduces the applicability. This proposed AD would also prohibit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2026-11813; Project Identifier MCAI-2025-01835-T] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2025-09-07, which applies to certain Airbus SAS Model A330-243, -243F, -841, and -941 airplanes. AD 2025-09-07 requires revising the existing airplane flight manual (AFM) by providing instructions to address dual loss of radio management panel (RMP) data synchronization, and the existing minimum equipment list (MEL) by removing relief for an inoperative RMP 3. Since the FAA issued AD 2025-09-07, a modification that addresses the unsafe condition has been developed. This proposed AD would continue to require the actions specified in AD 2025-09-07 and would require modifying the airplane. This proposed AD also reduces the applicability. This proposed AD would also prohibit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by December 3, 2026. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45 , by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportatio…
Citation: 91 FR 66016
