Transportation Department, Federal Aviation Administration
The FAA proposes to supersede Airworthiness Directive (AD) 2024-04-10, which applies to all Airbus Helicopters Deutschland GmbH (AHD) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters. AD 2024-04-10 requires repetitively inspecting certain part-numbered tail rotor (T/R) blades for a crack and, depending on the results, removing any cracked T/R blade from service. AD 2024-04-10 also prohibits installing certain T/R blades on any helicopter unless certain requirements are met. Since AD 2024-04-10 was issued, it was determined that inspection Method A should be discontinued and that additional limitations shall be provided. This proposed AD would retain the actions of AD 2024-04-10 and would require repetitively inspecting a certain tail rotor blade (TRB) assembly for cracks and, depending on the results, removing any cracked TRB assembly from service and replacing an affected part as terminating action for the repetitive inspections. This proposed AD would also prohibit installing an affected TRB assembly on any helicopter unless certain requirements are met. The FAA is proposing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2026-7230; Project Identifier MCAI-2026-00185-R] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2024-04-10, which applies to all Airbus Helicopters Deutschland GmbH (AHD) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters. AD 2024-04-10 requires repetitively inspecting certain part-numbered tail rotor (T/R) blades for a crack and, depending on the results, removing any cracked T/R blade from service. AD 2024-04-10 also prohibits installing certain T/R blades on any helicopter unless certain requirements are met. Since AD 2024-04-10 was issued, it was determined that inspection Method A should be discontinued and that additional limitations shall be provided. This proposed AD would retain the actions of AD 2024-04-10 and would require repetitively inspecting a certain tail rotor blade (TRB) assembly for cracks and, depending on the results, removing any cracked TRB assembly from service and replacing an affected part as terminating action for the repetitive inspections. This proposed AD would also prohibit installing an affected TRB assembly on any helicopter unless certain requirements are met. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive c…
Citation: 91 FR 47994
