Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for various helicopters. This AD was prompted by a report of a loss of tail rotor authority due to auxiliary system fluid loss caused by a yaw pedal damper housing fatigue fracture and attachment bolt fatigue fracture. This AD requires performing repetitive visual inspections of the auxiliary servo assembly, a fluorescent penetrant inspection (FPI) of the yaw pedal damper housing and, if necessary, corrective actions. This AD also requires determining and recording the remaining life of a certain part and revising the existing rotorcraft flight manual (RFM) to provide the flight crew with procedures to follow under certain conditions. This AD also requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable by incorporating a new service life limit for a certain part. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2026-2297; Project Identifier AD-2025-00184-R; Amendment 39-23366; AD 2026-11-05] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for various helicopters. This AD was prompted by a report of a loss of tail rotor authority due to auxiliary system fluid loss caused by a yaw pedal damper housing fatigue fracture and attachment bolt fatigue fracture. This AD requires performing repetitive visual inspections of the auxiliary servo assembly, a fluorescent penetrant inspection (FPI) of the yaw pedal damper housing and, if necessary, corrective actions. This AD also requires determining and recording the remaining life of a certain part and revising the existing rotorcraft flight manual (RFM) to provide the flight crew with procedures to follow under certain conditions. This AD also requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable by incorporating a new service life limit for a certain part. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective July 9, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed i…
Other Federal Register documents from the same docket.
Citation: 91 FR 33590
