Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B helicopters modified by Supplemental Type Certificate (STC) SR00223IB. This AD was prompted by reports of various deficiencies on the parts installed on the jettisonable window system. This AD requires removing the jettisonable window and, depending on the removal results, replacing the locking fingers; inspecting and installing any missing retaining rings; and inspecting the left-hand (LH) side and right-hand (RH) side emergency handle latch covers (covers) and, depending on the inspection results, replacing the covers or reinstalling airworthy covers. This AD also requires performing repetitive lubrication of the locking fingers installed on the windows jettisonable system and repetitive operational tests of the windows jettisonable system after each lubrication. Additionally, this AD requires modifying the helicopter by replacing each cover and prohibits the installation of certain window aesthetic covers or electrochromic windows unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2026-2283; Project Identifier MCAI-2026-00077-R; Amendment 39-23362; AD 2026-11-01] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. ( printed page 33588) SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B helicopters modified by Supplemental Type Certificate (STC) SR00223IB. This AD was prompted by reports of various deficiencies on the parts installed on the jettisonable window system. This AD requires removing the jettisonable window and, depending on the removal results, replacing the locking fingers; inspecting and installing any missing retaining rings; and inspecting the left-hand (LH) side and right-hand (RH) side emergency handle latch covers (covers) and, depending on the inspection results, replacing the covers or reinstalling airworthy covers. This AD also requires performing repetitive lubrication of the locking fingers installed on the windows jettisonable system and repetitive operational tests of the windows jettisonable system after each lubrication. Additionally, this AD requires modifying the helicopter by replacing each cover and prohibits the installation of certain window aesthetic covers or electrochromic windows unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective July 9, 2026. The Dir…
Other Federal Register documents from the same docket.
Citation: 91 FR 33587
