Transportation Department, Federal Aviation Administration
The FAA proposes to adopt a new airworthiness directive (AD) for all Diamond Aircraft Industries Inc. (DAI) Model DA 40, DA 40 F, and DA 40 NG airplanes. This proposed AD was prompted by several reports of passenger door separation during flight. This proposed AD would require revising the existing airplane flight manual (AFM) to provide the flight crew with revised operating limitations, emergency procedures, and normal operating procedures; inspecting the passenger door latching mechanism and safety hook mechanism areas and performing corrective action, as applicable; inspecting the safety hook, latching bolts, front and rear door guide blocks, canopy and passenger door warning light, carbon hinges, tension spring, retaining block, safety hook push button, latching mechanism spring, gas spring, and door frame; measuring the passenger door handle actuation force; modifying the airplane with placards; replacing the gas spring; and replacing the hook assembly, retaining block, door guide blocks, and door sealant if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2026-4633; Project Identifier MCAI-2025-01173-A] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for all Diamond Aircraft Industries Inc. (DAI) Model DA 40, DA 40 F, and DA 40 NG airplanes. This proposed AD was prompted by several reports of passenger door separation during flight. This proposed AD would require revising the existing airplane flight manual (AFM) to provide the flight crew with revised operating limitations, emergency procedures, and normal operating procedures; inspecting the passenger door latching mechanism and safety hook mechanism areas and performing corrective action, as applicable; inspecting the safety hook, latching bolts, front and rear door guide blocks, canopy and passenger door warning light, carbon hinges, tension spring, retaining block, safety hook push button, latching mechanism spring, gas spring, and door frame; measuring the passenger door handle actuation force; modifying the airplane with placards; replacing the gas spring; and replacing the hook assembly, retaining block, door guide blocks, and door sealant if necessary. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this NPRM by June 29, 2026. ADDRESSES: You may send comments, using the proce…
Other Federal Register documents from the same docket.
Citation: 91 FR 26952
