Transportation Department, Federal Aviation Administration
The FAA is superseding Airworthiness Directive (AD) 2023-22- 11, which applied to certain Embraer S.A. (Embraer) Model EMB-505 airplanes. AD 2023-22-11 required repetitively replacing the clutch retaining bolt and washer of the aileron autopilot servo mount. Since the FAA issued AD 2023-22-11, the FAA has determined that the applicability should include certain Model EMB-505 airplanes and, for certain airplanes, an additional requirement is necessary for the initial replacement of the retaining bolt and washer. This AD incorporates these additional airplanes into the applicability, adds the additional requirement, and also provides an optional terminating action for the repetitive retaining bolt and washer replacement. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2025-0478; Project Identifier MCAI-2024-00647-A; Amendment 39-23254; AD 2026-03-05] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2023-22-11, which applied to certain Embraer S.A. (Embraer) Model EMB-505 airplanes. AD 2023-22-11 required repetitively replacing the clutch retaining bolt and washer of the aileron autopilot servo mount. Since the FAA issued AD 2023-22-11, the FAA has determined that the applicability should include certain Model EMB-505 airplanes and, for certain airplanes, an additional requirement is necessary for the initial replacement of the retaining bolt and washer. This AD incorporates these additional airplanes into the applicability, adds the additional requirement, and also provides an optional terminating action for the repetitive retaining bolt and washer replacement. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective March 31, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 31, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0478; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains th…
Other Federal Register documents from the same docket.
Citation: 91 FR 8723
