Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. This AD was prompted by a determination made by the manufacturer that a high-pressure compressor (HPC) mini-disc anti-rotation block could possibly release into the HPC assembly stage 5 and 6 discs and the cone rotor rear shaft (HPC rear drum) during an engine operation. This AD requires repetitive borescope inspections (BSIs) of the HPC rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. This AD also allows an alternative method of complying with the repetitive BSIs if certain actions are accomplished. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2025-5398; Project Identifier MCAI-2024-00370-E; Amendment 39-23225; AD 2025-26-03] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. This AD was prompted by a determination made by the manufacturer that a high-pressure compressor (HPC) mini-disc anti-rotation block could possibly release into the HPC assembly stage 5 and 6 discs and the cone rotor rear shaft (HPC rear drum) during an engine operation. This AD requires repetitive borescope inspections (BSIs) of the HPC rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. This AD also allows an alternative method of complying with the repetitive BSIs if certain actions are accomplished. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 27, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 27, 2026. The FAA must receive comments on this AD by February 26, 2026. ADDRESSES: You may send comments, u…
Citation: 91 FR 1082
