Environmental Protection Agency
By a letter dated August 14, 2024, and supplemented by a letter dated March 5, 2025, the EPA's Office of Air and Radiation announced the convening of a proceeding for reconsideration of certain requirements in the final rule, "National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Technology Review," published on April 3, 2024. In this action, the EPA is staying provisions establishing compliance deadlines in 2025 for requirements that were added or revised by the April 3, 2024, final rule for 90 days pending reconsideration.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Environmental Protection Agency 40 CFR Part 63 [EPA-HQ-OAR-2002-0083; FRL-5919.3-02-OAR] RIN 2060-AW52 AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule; partial stay. SUMMARY: By a letter dated August 14, 2024, and supplemented by a letter dated March 5, 2025, the EPA's Office of Air and Radiation announced the convening of a proceeding for reconsideration of certain requirements in the final rule, “National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Technology Review,” published on April 3, 2024. In this action, the EPA is staying provisions establishing compliance deadlines in 2025 for requirements that were added or revised by the April 3, 2024, final rule for 90 days pending reconsideration. DATES: Effective March 31, 2025. ADDRESSES: Electronic copies of this document are available on the EPA's website at https://www.epa.gov/​stationary-sources-air-pollution/​integrated-iron-and-steel-manufacturing-national-emission . Copies of this document are also available at https://www.regulations.gov , at Docket ID No. EPA-HQ-OAR-2002-0083. FOR FURTHER INFORMATION CONTACT: For questions about this action, contact U.S. EPA, Attn: Katie Boaggio, Mail Drop: D243-02, 109 T.W. Alexander Drive, P.O. Box 12055, RTP, NC 27711; telephone number: (919) 541-2223; and email address: boaggio.katie@epa.gov . ( printed page 14208) SUPPLEMENTARY INFORMATION: I. Background On April 3, 2024, the EPA co…
Other Federal Register documents from the same docket.
National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Technology Review
Technical Correction: Extension of Deadlines: Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sources: Oil and Natural Gas Sector Climate Review Interim Final Rule; National Emission Standards for Hazardous Air Pollutants for Integrated Iron and Steel Manufacturing Facilities; National Emission Standards for Hazardous Air Pollutants for Coke Ovens: Pushing, Quenching, and Battery Stacks, and Coke Oven Batteries
Extension of Deadlines: Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sources: Oil and Natural Gas Sector Climate Review Interim Final Rule; National Emission Standards for Hazardous Air Pollutants for Integrated Iron and Steel Manufacturing Facilities; National Emission Standards for Hazardous Air Pollutants for Coke Ovens: Pushing, Quenching, and Battery Stacks, and Coke Oven Batteries
National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Technology Review: Interim Final Rule
National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Technology Review
Citation: 90 FR 14207
