Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-135ER, -135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145EP, -145ER, -145LR, -145MP, -145MR, and -145XR airplanes. This AD was prompted by a structural assessment that indicated certain central fuselage longitudinal splices are subjected to fatigue damage on multiple sites due to loose fasteners, which may reduce the structural residual strength below the required levels. This AD requires performing repetitive inspections of certain upper central fuselage longitudinal splices and reporting the inspection results, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. This AD also requires performing corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2024-2133; Project Identifier MCAI-2024-00243-T; Amendment 39-22922; AD 2024-26-07] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-135ER, -135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145EP, -145ER, -145LR, -145MP, -145MR, and -145XR airplanes. This AD was prompted by a structural assessment that indicated certain central fuselage longitudinal splices are subjected to fatigue damage on multiple sites due to loose fasteners, which may reduce the structural residual strength below the required levels. This AD requires performing repetitive inspections of certain upper central fuselage longitudinal splices and reporting the inspection results, as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is incorporated by reference. This AD also requires performing corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective March 11, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 11, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-2133; or in person at Docket Operations between 9 a.m. and 5 p.m.,…
Other Federal Register documents from the same docket.
Citation: 90 FR 8868
