Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2 helicopters. The FAA previously sent this AD as an emergency AD to all known U.S. owners and operators of these helicopters. This AD was prompted by a report of vibrations of the yaw axis during a hover taxi. This AD requires repetitively inspecting the bolted joint between the cardan- pivot joint assembly and the tail rotor actuator piston rod and, depending on the results, taking corrective action. This AD also prohibits installing certain tail rotor actuators unless its requirements are met. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2024-2670; Project Identifier MCAI-2024-00736-R; Amendment 39-22916; AD 2024-25-51] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2 helicopters. The FAA previously sent this AD as an emergency AD to all known U.S. owners and operators of these helicopters. This AD was prompted by a report of vibrations of the yaw axis during a hover taxi. This AD requires repetitively inspecting the bolted joint between the cardan-pivot joint assembly and the tail rotor actuator piston rod and, depending on the results, taking corrective action. This AD also prohibits installing certain tail rotor actuators unless its requirements are met. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 17, 2025. Emergency AD 2024-25-51, issued on December 12, 2024, which contains the requirements of this amendment, was effective with actual notice. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 17, 2025. The FAA must receive comments on this AD by February 18, 2025. …
Citation: 90 FR 14
