Transportation Department, Federal Aviation Administration
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, - 114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes; Model A320 series airplanes; and Model A321 series airplanes. This AD was prompted by reports of jamming of, or inability to open, the main landing gear (MLG) door during maintenance operations. This AD requires repetitive inspection of the MLG doors, and, depending on findings, accomplishment of applicable corrective actions, and prohibits the installation of affected parts as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2024-2553; Project Identifier MCAI-2024-00674-T; Amendment 39-22908; AD 2024-25-06] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes; Model A320 series airplanes; and Model A321 series airplanes. This AD was prompted by reports of jamming of, or inability to open, the main landing gear (MLG) door during maintenance operations. This AD requires repetitive inspection of the MLG doors, and, depending on findings, accomplishment of applicable corrective actions, and prohibits the installation of affected parts as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective December 30, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of December 30, 2024. The FAA must receive comments on this AD by January 27, 2025. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45 , by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions f…
Citation: 89 FR 100734
