Base
Rule2024-272542024-11-20

Airworthiness Directives; Embraer S.A. Airplanes

Transportation Department, Federal Aviation Administration

Abstract

The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model EMB-545 and EMB-550 airplanes. This AD was prompted by reports of corrosion, damage, and rupture on the down lock spring assemblies of the main landing gear (MLG) and nose landing gear (NLG). This AD requires inspecting for affected MLG and NLG down lock springs and replacing affected down lock springs, and prohibits the installation of affected parts, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Action & Dates

Action
Final rule; request for comments.
Dates
This AD is effective November 20, 2024.
Effective Date
2024-11-20

CFR References

Topics

Air transportationAircraftAviation safetyIncorporation by referenceSafety

Public Comment

Document Excerpt

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2024-2426; Project Identifier MCAI-2024-00625-T; Amendment 39-22886; AD 2024-23-07] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model EMB-545 and EMB-550 airplanes. This AD was prompted by reports of corrosion, damage, and rupture on the down lock spring assemblies of the main landing gear (MLG) and nose landing gear (NLG). This AD requires inspecting for affected MLG and NLG down lock springs and replacing affected down lock springs, and prohibits the installation of affected parts, as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective November 20, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of November 20, 2024. The FAA must receive comments on this AD by January 6, 2025. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45 , by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Bui

Read full document on FederalRegister.gov →

Full Document

Citation: 89 FR 91541