Transportation Department, Federal Aviation Administration
The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Model Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000- P3, Trent 1000-Q3, Trent 1000-R3, Trent 7000-72, and Trent 7000-72C engines. This proposed AD was prompted by reports of cracked intermediate pressure compressor (IPC) shaft assembly front air seals. This proposed AD would require an inspection of the affected IPC shaft assembly for cracking and, depending on the results of the inspection, repetitive inspections or replacement of the IPC shaft assembly front air seals, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2024-2414; Project Identifier MCAI-2024-00530-E] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Model Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3, Trent 1000-R3, Trent 7000-72, and Trent 7000-72C engines. This proposed AD was prompted by reports of cracked intermediate pressure compressor (IPC) shaft assembly front air seals. This proposed AD would require an inspection of the affected IPC shaft assembly for cracking and, depending on the results of the inspection, repetitive inspections or replacement of the IPC shaft assembly front air seals, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this NPRM by December 13, 2024. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45 , by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov . Follow the instructions for submitting comments. Fax: (202) 493-2251. Mail: U.S. Department of Transportatio…
Other Federal Register documents from the same docket.
Citation: 89 FR 85890
