Base
Rule2024-074382024-04-08

Airworthiness Directives; General Electric Company Engines, and Various Restricted Category Rotorcraft

Transportation Department, Federal Aviation Administration

Abstract

The FAA is superseding airworthiness directive (AD) 2024-05- 51, which applied to certain General Electric Company (GE) Model CT7- 2E1, CT7-2F1, CT7-8A, CT7-8E, and CT7-8F5 engines, and various restricted category helicopters with GE Model T700-GE-700, -701A, - 701C, -701D/CC, -701D, -401, -401C, CT7-2D, or CT7-2D1 engines installed. AD 2024-05-51 required a phase array ultrasonic inspection of the torque reference tube magnetic insert braze joint of the power turbine (PT) drive shaft assembly for inadequate braze coverage, and repair or replacement of the PT drive shaft assembly if necessary. This AD was prompted by at least four reports of failures of the torque reference tube magnetic insert braze joint of the PT drive shaft assembly within the last several months. This AD retains the requirements of AD 2024-05-51 and expands the applicability to include a PT drive shaft assembly part number that was inadvertently omitted. The FAA previously sent an emergency AD to all known U.S. owners and operators of these engines and helicopters and is now issuing this AD to address the unsafe condition on these products.

Action & Dates

Action
Final rule; request for comments.
Dates
This AD is effective April 23, 2024. Emergency AD 2024-06-51, issued on March 22, 2024, which contained the requirements of this amendment, was effective with actual notice.
Effective Date
2024-04-23

CFR References

Topics

Air transportationAircraftAviation safetyIncorporation by referenceSafety

Public Comment

Document Excerpt

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2024-0774; Project Identifier AD-2024-00197-E,R; Amendment 39-22723; AD 2024-06-51] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is superseding airworthiness directive (AD) 2024-05-51, which applied to certain General Electric Company (GE) Model CT7-2E1, CT7-2F1, CT7-8A, CT7-8E, and CT7-8F5 engines, and various restricted category helicopters with GE Model T700-GE-700, -701A, -701C, -701D/CC, -701D, -401, -401C, CT7-2D, or CT7-2D1 engines installed. AD 2024-05-51 required a phase array ultrasonic inspection of the torque reference tube magnetic insert braze joint of the power turbine (PT) drive shaft assembly for inadequate braze coverage, and repair or replacement of the PT drive shaft assembly if necessary. This AD was prompted by at least four reports of failures of the torque reference tube magnetic insert braze joint of the PT drive shaft assembly within the last several months. This AD retains the requirements of AD 2024-05-51 and expands the applicability to include a PT drive shaft assembly part number that was inadvertently omitted. The FAA previously sent an emergency AD to all known U.S. owners and operators of these engines and helicopters and is now issuing this AD to address the unsafe condition on these products. DATES: This AD is effective April 23, 2024. Emergency AD 2024-06-51, issued on M

Read full document on FederalRegister.gov →

Full Document

Citation: 89 FR 24363