Energy Conservation Program: Energy Conservation Standards for Manufactured Housing; Extension of Compliance Date

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Energy 10 CFR Part 460 [EERE-2009-BT-BC-0021] RIN 1904-AF53 AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final rule. SUMMARY: The U.S. Department of Energy (DOE) is publishing a final rule to amend the compliance date for its manufactured housing energy conservation standards. Currently, manufacturers must comply with these standards on and after May 31, 2023. This final rule delays compliance until July 1, 2025, for Tier 2 homes, and until 60 days after issuance of enforcement procedures for Tier 1 homes. DOE is delaying the compliance date to allow DOE more time to establish enforcement procedures that provide clarity for manufacturers and other stakeholders regarding DOE's expectations of manufacturers and DOE's plans for enforcing the standards. DATES: This final rule is effective May 30, 2023. ADDRESSES: The docket for this rulemaking, which includes Federal Register notices, comments, and other supporting documents/materials, is available for review at www.regulations.gov . All documents in the docket are listed in the www.regulations.gov index. However, not all documents listed in the index may be publicly available, such as information that is exempt from public disclosure. The docket web page can be found at www.regulations.gov/​docket?​D=​EERE-2009-BT-BC-0021 . The docket web page contains instructions on how to access all documents, including public comments, in the docket. FOR FURTHER INFOR…