Energy Department
This final rule amends the current U.S. Department of Energy test procedure for external power supplies by clarifying the scope of the test procedure more explicitly, providing more specific instructions for testing single-voltage external power supplies with multiple-output busses and external power supplies shipped without an output cord, providing instructions allowing for functionality unrelated to the external power supply circuit to be disconnected during testing so long as the disconnection does not impact the functionality of the external power supply itself, specifying test requirements for adaptive external power supplies that conform to the industry-based Universal Serial Bus Power Delivery specifications consistent with current test procedure waivers that DOE has already granted for these products, and reorganizing the test procedure to centralize definitions, consolidate generally applicable requirements, and better delineate requirements for single-voltage, multiple-voltage, and adaptive external power supplies.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Energy 10 CFR Part 430 [EERE-2019-BT-TP-0012] RIN 1904-AD86 AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final rule. SUMMARY: This final rule amends the current U.S. Department of Energy test procedure for external power supplies by clarifying the scope of the test procedure more explicitly, providing more specific instructions for testing single-voltage external power supplies with multiple-output busses and external power supplies shipped without an output cord, providing instructions allowing for functionality unrelated to the external power supply circuit to be disconnected during testing so long as the disconnection does not impact the functionality of the external power supply itself, specifying test requirements for adaptive external power supplies that conform to the industry-based Universal Serial Bus Power Delivery specifications consistent with current test procedure waivers that DOE has already granted for these products, and reorganizing the test procedure to centralize definitions, consolidate generally applicable requirements, and better delineate requirements for single-voltage, multiple-voltage, and adaptive external power supplies. DATES: The effective date of this rule is September 19, 2022. The final rule changes will be mandatory for product testing starting February 15, 2023. The incorporation by reference of certain other publications listed in this rule was approved by the Director of the Federal…
Other Federal Register documents from the same docket.
Energy Conservation Program: Test Procedure for External Power Supplies and Battery Chargers
Energy Conservation Program: Test Procedure for External Power Supplies
Energy Conservation Program: Test Procedure for External Power Supplies
Energy Conservation Program: Test Procedure for External Power Supplies
Citation: 87 FR 51200