Transportation Department, Federal Aviation Administration
The FAA is superseding Airworthiness Directive (AD) 80-13-10, AD 80-13-12 R1, and AD 2008-03-01, which applied to certain de Havilland (type certificate now held by Viking Air Limited) Model DHC- 6-1, DHC-6-100, DHC-6-200, and DHC-6-300 airplanes. AD 80-13-10 required repetitively inspecting the main landing gear (MLG) legs for cracks and corrosion. AD 80-13-12 R1 required repetitively inspecting each engine nacelle lower longeron for cracks and buckling. AD 2008-03- 01 required incorporating inspections, modifications, and life limits of certain structural components into the aircraft maintenance program. Since the FAA issued those ADs, new and more restrictive airworthiness limitations have been issued for certain structural components. This AD requires incorporating into maintenance records new or revised life limits, modification limits, and inspection or overhaul intervals. The FAA is issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2021-0960; Project Identifier 2019-CE-021-AD; Amendment 39-21921; AD 2022-03-04] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 80-13-10, AD 80-13-12 R1, and AD 2008-03-01, which applied to certain de Havilland (type certificate now held by Viking Air Limited) Model DHC-6-1, DHC-6-100, DHC-6-200, and DHC-6-300 airplanes. AD 80-13-10 required repetitively inspecting the main landing gear (MLG) legs for cracks and corrosion. AD 80-13-12 R1 required repetitively inspecting each engine nacelle lower longeron for cracks and buckling. AD 2008-03-01 required incorporating inspections, modifications, and life limits of certain structural components into the aircraft maintenance program. Since the FAA issued those ADs, new and more restrictive airworthiness limitations have been issued for certain structural components. This AD requires incorporating into maintenance records new or revised life limits, modification limits, and inspection or overhaul intervals. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective March 17, 2022. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 17, 2022. ADDRESSES: For service information identified in this final rule, contact Viki…
Other Federal Register documents from the same docket.
Citation: 87 FR 7692
