Transportation Department, Federal Aviation Administration
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-500 and -600 series airplanes. This AD was prompted by a quality control review on the final assembly line, which determined that the wrong aluminum alloy was used to manufacture several structural parts. This AD requires a one-time eddy current conductivity measurement of certain cabin and cargo compartment structural parts to determine if an incorrect aluminum alloy was used, and replacement of any affected part with a serviceable part. We are issuing this AD to address the unsafe condition on these products.
Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2016-7264; Product Identifier 2015-NM-185-AD; Amendment 39-18998; AD 2017-17-08] RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-500 and -600 series airplanes. This AD was prompted by a quality control review on the final assembly line, which determined that the wrong aluminum alloy was used to manufacture several structural parts. This AD requires a one-time eddy current conductivity measurement of certain cabin and cargo compartment structural parts to determine if an incorrect aluminum alloy was used, and replacement of any affected part with a serviceable part. We are issuing this AD to address the unsafe condition on these products. DATES: This AD is effective October 2, 2017. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of October 2, 2017. ADDRESSES: For service information identified in this final rule, contact Airbus SAS, Airworthiness Office—EAL, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com ; Internet http://www.airbus.com . You may view this referenced service informatio…
Other Federal Register documents from the same docket.
Citation: 82 FR 40670
