Energy Conservation Program: Energy Conservation Standards for Walk-In Coolers and Freezers; Correction

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Energy 10 CFR Part 431 [Docket No. EERE-2008-BT-TP-0014] RIN 1904-AB85 AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final rule; correcting amendments. SUMMARY: This document makes a correction to the regulations pertaining to the test procedure for walk-in coolers and freezers. The correction addresses an erroneous temperature condition for walk-in freezers. DATES: Effective Date: June 2, 2011. FOR FURTHER INFORMATION CONTACT: Mr. Charles Llenza, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue, SW., Washington, DC 20585-0121. Telephone: (202) 586-2192. E-mail: Charles.Llenza@ee.doe.gov . In the Office of the General Counsel, contact Mr. Michael Kido, U.S. Department of Energy, Office of the General Counsel, GC-71, 1000 Independence Avenue, SW., Washington, DC 20585-0121. Telephone: (202) 586-5709. E-mail: Michael.Kido@hq.doe.gov . SUPPLEMENTARY INFORMATION: I. Background The Energy Policy and Conservation Act (EPCA), as amended by section 312(c) of the Energy Independence and Security Act (EISA 2007), requires the Department of Energy (DOE) to prescribe a test procedure to measure the energy use of walk-in coolers and freezers (collectively, walk-ins). See 42 U.S.C. 6314(a) . DOE recently satisfied this requirement by issuing a final rule establishing a test procedure for manufacturers to use when measuring the energy use of a wa…