Cranes and Derricks in Construction

Document Headings Document headings vary by document type but may contain the following: the agency or agencies that issued and signed a document the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to the agency docket number / agency internal file number the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Labor Occupational Safety and Health Administration 29 CFR Part 1926 [Docket ID-OSHA-2007-0066] RIN 1218-AC01 AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Final rule. SUMMARY: OSHA is revising the Cranes and Derricks Standard and related sections of the Construction Standard to update and specify industry work practices necessary to protect employees during the use of cranes and derricks in construction. This final standard also addresses advances in the designs of cranes and derricks, related hazards, and the qualifications of employees needed to operate them safely. Under this final rule, employers must determine whether the ground is sufficient to support the anticipated weight of hoisting equipment and associated loads. The employer is then required to assess hazards within the work zone that would affect the safe operation of hoisting equipment, such as those of power lines and objects or personnel that would be within the work zone or swing radius of the hoisting equipment. Finally, the employer is required to ensure that the equipment is in safe operating condition via required inspections and that employees in the work zone are trained to recognize hazards associated with the use of the equipment and any related duties that they are assigned to perform. DATES: This final rule will become effective November 8, 2010. The incorporation by reference of specific publications listed in this final rule is approved by the Director…