Articles of Iron or Steel · $188.3M monthly imports · 100% from 1 countries · Updated daily from USITC
General
Free
Special
Free
Column 2
Free
Trade Agreement Eligibility
Monthly Imports
$188.3M
2026-01
Trade Concentration
100%
from top 3 of 1 origins
Regulatory Pressure
LOW
0 rulings — · 0 reg · 0 cases
Global Rates
🇺🇸 Free
🇬🇧 United Kingdom: N/A · 🇪🇺 European Union: N/A · 🇨🇦 Canada: N/A · 🇧🇷 Brazil: N/A
Compare All →
Data compiled from USITC HTS, US Census Bureau, CPSC SaferProducts.gov · As of 2026-04-28 · Updates monthly
100% of US imports for this code come from just 1 countries. High origin concentration increases exposure to trade disruptions or tariff escalations.
This is a high-volume import code — $188M in monthly US imports. Duty rate changes or trade remedy actions on this code have significant economic impact.
Iron and steel articles
Active — 25% on steel, 25% on aluminum (aluminum raised from 10% to 25% effective March 12, 2025)
Effective 2018-03-23
These additional tariffs apply on top of the general duty rate. View full trade remedy tracker →
| Code | Description | Rate |
|---|---|---|
| 7304.11.00 | Of stainless steel | Free |
| 7304.11.00.20 | Having an outside diameter not exceeding <il>114.3 mm</il> | — |
| 7304.11.00.50 | Having an outside diameter exceeding <il>114.3 mm</il> but not exceeding <il>406.4 mm</il> | — |
| 7304.11.00.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.19 | Other: | — |
| 7304.19.10 | Of iron or nonalloy steel | Free |
| 7304.19.10.20 | Having an outside diameter not exceeding <il>114.3 mm</il> | — |
| 7304.19.10.30 | Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il> | — |
| 7304.19.10.45 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.19.10.60 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.19.10.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.19.50 | Of other alloy steel | Free |
| 7304.19.50.20 | Having an outside diameter not exceeding <il>114.3 mm</il> | — |
| 7304.19.50.50 | Having an outside diameter exceeding <il>114.3 mm</il> but not exceeding <il>406.4 mm</il> | — |
| 7304.19.50.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.22.00 | Drill pipe of stainless steel | Free |
| 7304.22.00.30 | Having a wall thickness not exceeding <il>9.5 mm</il> | — |
| 7304.22.00.45 | Having a wall thickness exceeding <il>9.5 mm</il> | — |
| 7304.22.00.60 | Having an outside diameter exceeding <il>168.3 mm</il> | — |
| 7304.23 | Other drill pipe: | — |
| 7304.23.30.00 | Of iron or nonalloy steel | Free |
| 7304.23.60 | Of alloy steel | Free |
| 7304.23.60.30 | Having a wall thickness not exceeding <il>9.5 mm</il> | — |
| 7304.23.60.45 | Having a wall thickness exceeding <il>9.5 mm</il> | — |
| 7304.23.60.60 | Having an outside diameter exceeding <il>168.3 mm</il> | — |
| 7304.24 | Other, of stainless steel: | — |
| 7304.24.30 | Threaded or coupled | Free |
| 7304.24.30.10 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.24.30.20 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.24.30.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.24.30.40 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.24.30.45 | Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm | — |
| 7304.24.30.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.24.40 | Other | Free |
| 7304.24.40.10 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.24.40.20 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.24.40.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.24.40.40 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.24.40.50 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.24.40.60 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.24.40.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.24.60 | Tubing | Free |
| 7304.24.60.15 | Having a wall thickness not exceeding <il>9.5 mm</il> | — |
| 7304.24.60.30 | Having a wall thickness exceeding <il>9.5 mm</il> | — |
| 7304.24.60.45 | Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il> | — |
| 7304.24.60.60 | Having an outside diameter of <il>215.9 mm</il> or more but not exceeding <il>406.4 mm</il> | — |
| 7304.24.60.75 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.29 | Other: | — |
| 7304.29.10 | Threaded or coupled | Free |
| 7304.29.10.10 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.10.20 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.10.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.10.40 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.10.50 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.10.60 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.10.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.29.20 | Other | Free |
| 7304.29.20.10 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.20.20 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.20.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.20.40 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.20.50 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.20.60 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.20.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.29.31 | Threaded or coupled | Free |
| 7304.29.31.10 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.31.20 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.31.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.31.40 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.31.50 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.31.60 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.31.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.29.41 | Other | Free |
| 7304.29.41.10 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.41.20 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.41.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.41.40 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.41.50 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.29.41.60 | Having a wall thickness of <il>12.7 mm</il> or more | — |
| 7304.29.41.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.29.50 | Of iron or nonalloy steel | Free |
| 7304.29.50.15 | Having a wall thickness not exceeding <il>9.5 mm</il> | — |
| 7304.29.50.30 | Having a wall thickness exceeding <il>9.5 mm</il> | — |
| 7304.29.50.45 | Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il> | — |
| 7304.29.50.60 | Having an outside diameter of <il>215.9 mm</il> or more but not exceeding <il>406.4 mm</il> | — |
| 7304.29.50.75 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.29.61 | Of other alloy steel | Free |
| 7304.29.61.15 | Having a wall thickness not exceeding <il>9.5 mm</il> | — |
| 7304.29.61.30 | Having a wall thickness exceeding <il>9.5 mm</il> | — |
| 7304.29.61.45 | Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il> | — |
| 7304.29.61.60 | Having an outside diameter of <il>215.9 mm</il> or more but not exceeding <il>406.4 mm</il> | — |
| 7304.29.61.75 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.31 | Cold-drawn or cold-rolled (cold-reduced): | — |
| 7304.31.30.00 | Hollow bars | Free |
| 7304.31.60 | Other | Free |
| 7304.31.60.10 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | — |
| 7304.31.60.50 | Other | — |
| 7304.39.00 | Other | Free |
| 7304.39.00.02 | Having an outside diameter less than <il>38.1 mm</il> | — |
| 7304.39.00.04 | Having an outside diameter of <il>38.1 mm</il> or more but less than 190.5 mm | — |
| 7304.39.00.06 | Having an outside diameter of <il>190.5 mm</il> or more but not exceeding <il>285.8 mm</il> | — |
| 7304.39.00.08 | Having an outside diameter exceeding <il>285.8 mm</il> | — |
| 7304.39.00.16 | Galvanized, having an outside diameter not exceeding <il>114.3 mm</il> | — |
| 7304.39.00.20 | Having an outside diameter less than <il>38.1 mm</il> | — |
| 7304.39.00.24 | Having a wall thickness less than <il>6.4 mm</il> | — |
| 7304.39.00.28 | Having a wall thickness of <il>6.4 mm</il> or more but not exceeding <il>12.7 mm</il> | — |
| 7304.39.00.32 | Having a wall thickness exceeding <il>12.7 mm</il> | — |
| 7304.39.00.36 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.39.00.40 | Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | — |
| 7304.39.00.44 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.39.00.48 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.39.00.52 | Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | — |
| 7304.39.00.56 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.39.00.62 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.39.00.68 | Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | — |
| 7304.39.00.72 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.39.00.76 | Having a wall thickness less than <il>19 mm</il> | — |
| 7304.39.00.80 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.41 | Cold-drawn or cold-rolled (cold-reduced): | — |
| 7304.41.30 | Of an external diameter of less than <il>19 mm</il> | Free |
| 7304.41.30.05 | Of high-nickel alloy steel | — |
| 7304.41.30.15 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | — |
| 7304.41.30.45 | Other | — |
| 7304.41.60 | Other | Free |
| 7304.41.60.05 | Of high-nickel alloy steel | — |
| 7304.41.60.15 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | — |
| 7304.41.60.45 | Other | — |
| 7304.49.00 | Other | Free |
| 7304.49.00.05 | Of high-nickel alloy steel | — |
| 7304.49.00.15 | Hollow bars | — |
| 7304.49.00.45 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | — |
| 7304.49.00.60 | Other | — |
| 7304.51 | Cold-drawn or cold-rolled (cold-reduced): | — |
| 7304.51.10.00 | Suitable for use in the manufacture of ball or roller bearings | Free |
| 7304.51.50 | Other | Free |
| 7304.51.50.05 | Of high-nickel alloy steel | — |
| 7304.51.50.15 | Of heat-resisting steel | — |
| 7304.51.50.45 | Other | — |
| 7304.51.50.60 | Other | — |
| 7304.59 | Other: | — |
| 7304.59.10.00 | Suitable for use in the manufacture of ball or roller bearings | Free |
| 7304.59.20 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | Free |
| 7304.59.20.30 | Of heat-resisting steel | — |
| 7304.59.20.40 | Having an outside diameter less than <il>38.1 mm</il> | — |
| 7304.59.20.45 | Having an outside diameter of <il>38.1 mm</il> or more but not exceeding <il>114.3 mm</il> | — |
| 7304.59.20.55 | Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>190.5 mm</il> | — |
| 7304.59.20.60 | Having an outside diameter of <il>190.5 mm</il> or more but not exceeding <il>285.8 mm</il> | — |
| 7304.59.20.70 | Having an outside diameter exceeding <il>285.8 mm</il> but not exceeding <il>406.4 mm</il> | — |
| 7304.59.20.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.59.60.00 | Of heat-resisting steel | Free |
| 7304.59.80 | Other | Free |
| 7304.59.80.10 | Having an outside diameter less than <il>38.1 mm</il> | — |
| 7304.59.80.15 | Having a wall thickness less than <il>6.4 mm</il> | — |
| 7304.59.80.20 | Having a wall thickness of <il>6.4 mm</il> or more but not exceeding <il>12.7 mm</il> | — |
| 7304.59.80.25 | Having a wall thickness exceeding <il>12.7 mm</il> | — |
| 7304.59.80.30 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.59.80.35 | Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | — |
| 7304.59.80.40 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.59.80.45 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.59.80.50 | Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | — |
| 7304.59.80.55 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.59.80.60 | Having a wall thickness less than <il>12.7 mm</il> | — |
| 7304.59.80.65 | Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | — |
| 7304.59.80.70 | Having a wall thickness of <il>19 mm</il> or more | — |
| 7304.59.80.80 | Having an outside diameter exceeding <il>406.4 mm</il> | — |
| 7304.90 | Other: | — |
| 7304.90.10.00 | Of iron or nonalloy steel | Free |
| 7304.90.30.00 | Of alloy steel | Free |
| 7304.90.50.00 | Of iron or nonalloy steel | Free |
| 7304.90.70.00 | Of alloy steel | Free |
LINE PIPE OF A KIND USED FOR OIL OR GAS PIPELINES, SEAMLESS, OF STAINLESS STEEL
Census Bureau export classification matching this HTS import code.
