The country of origin of a wireless charger set

N331943 April 20, 2023 OT:RR:NC:N2:220 CATEGORY: Origin Jane Lee D and S Industries (Philippines) Corporation Unit 1-5 Orient Goldcrest Suntrust Ecotown, Bldg. 2 Cavite Philippines RE:      The country of origin of a wireless charger set Dear Ms. Lee: In your letter dated April 3, 2023, you requested a country of origin ruling. The merchandise under consideration is identified as the 15W Wireless Charger with 3ft USB-A to C Cable (Wireless Charger), Model WD-231E, which is described as an inductive-type charger for wirelessly charging enabled personal electronic devices.  The Wireless Charger is comprised of a plastic molded housing containing a printed circuit board assembly (PCBA) and  a charging module.  Included in the retail packaging is the insulated electrical cable that is equipped with a USB Type-A connector on one side and a USB Type-C connector on the other side.  In use, the cable is plugged into a the Wireless Charger and the USB socket of a rectifying adapter, and the user is able to charge a capable device’s battery when it is placed in alignment with the module. In your submission, you state that the Wireless Charger is comprised of materials from China, Taiwan, and the Philippines.  The assembly process begins with the manufacturing of a PCBA that occurs in the Philippines by soldering multiple components, such as integrated circuits, resistors, capacitors, diodes, a transformer, etc. onto a bare PCB via a surface mount and through-hole insertion process.  The PCBA, a Philippine origin inductive module, and a heat sink are mounted inside the plastic is shell to produce a functional charger.  The final product undergoes testing and visual inspection before it is packaged in a retail carton with the cable. You also state the electric cable is made up from components that are sourced from Taiwan and the Philippines, where the copper conductor is said to be drawn in the Philippines.  The cable is assembled in the Philippines by soldering a male USB Type-A connector to one end of the cable and a USB Type-C connector on the other end. The braided cable is then tested before it is packaged with the power adapter described above prior to export. General Rule of Interpretation (GRI) 1, Harmonized Tariff Schedule of the United States (HTSUS), states in part that for legal purposes, classification shall be determined according to the terms of the headings, any relative section or chapter notes and, unless otherwise required, according to the remaining GRI’s taken in order.  Goods that are, prima facie, classifiable under two or more headings, are classifiable in accordance with GRI 3. GRI 3 (a) states that the heading that provides the most specific description shall be preferred to headings providing a more general description.  However, when two or more headings refer to only part of the items in a composite good or set, those headings are to be regarded as equally specific in relation to the goods, even if one of them gives a more complete or precise description of the good.  As such, they are regarded as equally specific and classification of the composite good or set is to be determined by GRI 3 (b) or GRI 3 (c) taken in the appropriate order in which they are set out in GRI 3.  GRI 3 (b) states in part that composite goods or sets, which cannot be classified by reference to GRI 3 (a), are to be classified as if they consisted of the component that gives them their essential character. The Explanatory Notes to the Harmonized Tariff System, although not legally binding, provide guidance in the interpretation of the Harmonized Commodity Description and Coding System at the international level.  Explanatory Note X to GRI 3 (b) provides that the term "goods put up in sets for retail sale" means goods that: (a) consist of at least two different articles which are, prima facie, classifiable in different headings; (b) consist of articles put up together to meet a particular need or carry out a specific activity; and (c) are put up in a manner suitable for sale directly to users without re-packing.  Goods classifiable under GRI 3 (b) are classified as if they consisted of the material or component which gives them their essential character, which may be determined by the nature of the material or component, its bulk, quantity, weight or value, or by the role of a constituent material in relation to the use of the article. The Wall Charger Set consists of two or more different articles that are, prima facie, classifiable in different headings.  The set also consists of articles put up together to carry out a specific activity (i.e., charging personal electronics).  Finally, the articles are put up in a manner suitable for sale directly to users without repacking.  Therefore, the Wireless Charger Set is described within the meaning of "goods put up in sets for retail sale". In accordance with GRI 3 (b), which states in part that goods put up in sets for retail sale, that cannot be classified by reference to GRI 3 (a), are to be classified as if they consisted of the component which gives them their essential character.  In our view, the article that provides the essential character of the Wireless Charger Set is the wireless charger. The “country of origin” is defined in 19 CFR 134.1(b) as “the country of manufacture, production, or growth of any article of foreign origin entering the United States.  Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the 'country of origin' within the meaning of this part.” The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character or use, different from that possessed by the article prior to processing.  See Texas Instruments Inc. v. United States, 69 C.C.P.A. 151 (1982).  This determination is based on the totality of the evidence.  See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Regarding the country of origin of Wireless Charger Set, in our view the assembly of the PCBA in the Philippines by soldering the individual components onto the bare board results in a substantial transformation of the components to produce a PCBA of Philippine origin.  Furthermore, it is the opinion of this office that the Philippine origin PCBA and inductive module establishes the function of the electrical charging device because it is the article within the assembly that converts and supplies electricity to electronic devices via the USB sockets.  As such, we find that the components that make up the Wireless Charger Set are transformed in the Philippines into a new and different article of commerce with a distinct name, character, and use.  Thus, the 15W Wireless Charger with 3ft USB-A to C Cable, Model WD-231E, is considered a product of the Philippines for origin and marking purposes at the time of importation into the United States. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported.  If you have any questions regarding the ruling, contact National Import Specialist Karl Moosbrugger at karl.moosbrugger@cbp.dhs.gov. Sincerely, Steven A. Mack Director National Commodity Specialist Division